Sprinter p0715 (trans Speed Sensor) T-shooting?
03-21-2011, 01:24 PM
Registered User
Thread Starter
Join Date: Mar 2011
Location: new lenox, il
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Sprinter p0715 (trans Speed Sensor) T-shooting?
My wife's 2005 Sprinter went into limp mode (2 & R only) and is showing a p0715 code (Input/Turbine speed sensor A Circuit malfunction). Since the speed sensor appears to be on a control block on top of the valve body, I'm trying to make sure It's truly a bad sensor before I go through the effort of opening up the transmission to replace it. Oh yea, that and the $200 in parts and $170 in fluid.
Has anyone completed this project themselves that could share some experiences, or have any recommendation on how to verify that the speed sensor(s) are actually at fault, and not just a wiring connector for example?
I'd appreciate it.
03-23-2011, 11:43 PM
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Yes i have replace them on the dodge charger with the same transmission. And it did fix the problem. But you could also have a wiring problem too. If you need the pdf file for testing, let me know.
03-26-2011, 09:48 AM
Registered User
Thread Starter
Join Date: Mar 2011
Location: new lenox, il
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the offer, that would be very helpful!
03-27-2011, 05:16 PM
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Send me your email addres or post it.
04-26-2011, 04:12 PM
Join Date: Apr 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
`hello i have a 2005 sprinter with code po715 i have changed electric control module two sensers1-05189057aa_1-52108314aa and still have same code after clearing ....any ideas
04-27-2011, 10:32 PM
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Welcome to DF
Do you need the a pdf file?
12-31-2011, 01:41 PM
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
will you send me the pdf file?
Thank
01-02-2012, 10:59 PM
Site Moderator & Tech
Dodge Forum Moderator
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Sure I can, Send me your email address by a pm and I'll send it.
06-20-2012, 01:44 PM
Join Date: Jun 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
master tech, i sent you a pm with my email can i get it to. mine also did the 730 code after it spit the 715 out. thanks for the help.
08-09-2013, 11:01 AM
Join Date: Aug 2013
Location: Brandon, Fl
Posts: 2
Likes: 0
code P0715 need PDF
Yes code P0715 need PDF to check wireing Replaced conductor plate. Still code and in limp mode.
Once changed right part will unit clear limp mode or will I need to take to dealer?
The following users liked this post: