1996 cirrus lxi trouble codes - DodgeForum.com


Dodge Stratus The Dodge Stratus. Whether you've got a sedan or coupe, base model or R/T, theDodge Stratus has winning looks and thrilling performance.

1996 cirrus lxi trouble codes

Reply
 
 
  #1  
Old 07-17-2004, 11:18 PM
csmendez
csmendez is offline
Thread Starter
 
Join Date: Jul 2004
Posts: 10
Default 1996 cirrus lxi trouble codes

I own a 1996 Chrysler Cirrus that has 180k miles on it and I have some questions on some Engine codes (1) P0320 Says "no crank refrence @ pcm, (2) P0134 upstream 02s (1/1) stays @ center. also have ABS code (79) cab malfunction. Transmision code (74) calculated oil temp in use. ???? how can I fix or adrress these problems. Any help would be very appreciated.
Reply With Quote
  #2  
Old 07-18-2004, 05:40 AM
JCswm
JCswm is offline
Veteran
 
Join Date: May 2004
Location: Florida
Posts: 363
Default RE: 1996 cirrus lxi trouble codes

If your car won't start, clean the oil out of the crank sensor connector & try it (Valve cover leaks right on that connector)
If it still wont start replace the crank sensor
replace the O2 sensor
ABS code erace .... if it comes back you'll need to replace the CAB
Trans code, erace. if it returns that code does not turn a light on or cause it to go into limp-in but you might want to get the trans cooler backflushed
let me know if this helped
John
Reply With Quote
  #3  
Old 07-18-2004, 02:50 PM
csmendez
csmendez is offline
Thread Starter
 
Join Date: Jul 2004
Posts: 10
Default RE: 1996 cirrus lxi trouble codes

the car runs but once in a while it will stall. Where is the "Crank sensor", where is the o2 upstream sensor, and what is a cab. I am about to change the transmision fluid and back flush the transmision cooler. thanks for you help.
Reply With Quote
  #4  
Old 07-18-2004, 06:01 PM
JustinSane
JustinSane is offline
 
Join Date: Jul 2004
Location:
Posts: 11
Default RE: 1996 cirrus lxi trouble codes

If you remove the O2 sensor sometimes you have to change the exhaust line

Do it as your own risk
Reply With Quote
  #5  
Old 07-18-2004, 06:15 PM
JCswm
JCswm is offline
Veteran
 
Join Date: May 2004
Location: Florida
Posts: 363
Default RE: 1996 cirrus lxi trouble codes

Quote:
ORIGINAL: csmendez

the car runs but once in a while it will stall. Where is the "Crank sensor", where is the o2 upstream sensor, and what is a cab. I am about to change the transmision fluid and back flush the transmision cooler. thanks for you help.
With a flashlight look under the hood behind the transmission where it's bolted to the engine. you'll see the sensor it's a 3 wire round sensor held in place by one 1 10MM bolt. On the Transmission.
The Upstream O2 is located in the exhaust BEFORE the cat, I think it's in the front downpipe
CAB= Controller, Anti-lock Brakes...... That sounds expencive!!!
Reply With Quote
  #6  
Old 07-19-2004, 03:29 PM
csmendez
csmendez is offline
Thread Starter
 
Join Date: Jul 2004
Posts: 10
Default RE: 1996 cirrus lxi trouble codes

thanks I will look into it.
Reply With Quote
 
 
Reply

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
apweng
Dodge Ram Van
1
08-02-2015 02:40 PM
kmbaseball7
Dodge/Ram Diesel
3
07-30-2015 06:45 PM
Crytot
1st Gen Dakota
5
07-13-2015 06:26 PM
eagle101
2nd Gen Ram Tech
2
07-12-2015 11:43 AM
kassie78
Dodge Caravan
0
07-06-2015 11:23 PM



Thread Tools
Search this Thread

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -4. The time now is 07:52 AM.


 
  • Ask a Question
    Get answers from community experts
What's your question?
Send