2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Transmission rebuild

Thread Tools
 
Search this Thread
 
  #1  
Old 02-26-2017, 09:18 PM
rinowskib's Avatar
rinowskib
rinowskib is offline
Registered User
Thread Starter
Join Date: Feb 2017
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default Transmission rebuild

So... I just bought a 2000 Dodge Ram 5.2l. Clutch was inop when I bought it so I did a clutch and a rear main. Now that it's driving "properly" I have a problem. I have a crunch when shifting from first to second and from second to third which isn't as bad as shifting to second is. I decided to just buy a transmission rebuild kit but I cannot find a model number on my transmission and my truck isn't on the "lookup table" I found online. It's the 5spd 4 wheel drive. Any help would be appreciated!
 
  #2  
Old 02-26-2017, 10:11 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,749
Likes: 0
Received 3,176 Likes on 2,929 Posts
Default

Half ton? One ton? What motor?
 
  #3  
Old 02-26-2017, 10:34 PM
CJSuhr's Avatar
CJSuhr
CJSuhr is offline
Veteran
Join Date: Nov 2016
Location: Omaha NE
Posts: 344
Likes: 0
Received 0 Likes on 0 Posts
Default

If it's the 1500 with the 5.2, you should have the nv3500.
 
  #4  
Old 03-02-2017, 09:00 AM
rinowskib's Avatar
rinowskib
rinowskib is offline
Registered User
Thread Starter
Join Date: Feb 2017
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Your absolutely correct it is the nv3500 a local transmission shop has the small parts kit with synchros for $260 so not a bad deal. I'll probably drive it a little longer before I pull the trans back out though
 




All times are GMT -4. The time now is 03:42 PM.