New Lower Price!

I'm now asking $500 for the Clearwater EQ 2.02 Engine Heads (plus shipping), and $150 for the Hughe's Engine HER0814AL camshaft (plus shipping). Or you can buy the Heads and the Camshaft as a set for $600 plus shipping. PM me if interested.

************************************************** *******************************

I've got a pair of Clearwater EQ 2.02 Engine Heads for sale. I just got these heads back form the machine shop, had them milled flat and checked for cracks, everything is good. They were removed from an engine that had the timing chain set incorrectly, and the valves came in contact with the pistons. 4 valves were damaged and they have been replaced with new valves from Hughes Engines. The heads were milled flat, but you can see slight damage in 1 of the pictures, that damage is from a messed up valve, they have been checked and milled. These heads are equipped with Bee-Hive springs to match the Hughe's Engine HER0814AL camshaft. These heads are $880 new, I'm asking $600 plus shipping. I'm selling because I'd like to buy a set of Clearwater 1.92 heads. They are located in Louisville, KY. Message me if your interested.

I also have valve covers for sale, $25 for the pair + shipping.








Valve Covers:

 

Bump!

 

These are so tempting. I just dont need the larger valves.

Good stuff here people, pay the man!

 

I still have all these parts. Please PM me if interested!

 

Still have these heads. Contact me if interested!

 

I might be interested... are the valve 1 piece stainless valves? Also what are the springs max lift capabilities? I have a set of odessa heads with roughly 2k miles on them. Theyre 1.92 stainless 1 piece valves. .525 max lift springs. Would you be willing to trade?

 

Yes, they are 1 piece stainless steel valves. The springs are good to .525, they are beehive springs. The springs also come from Odessa, they matches the springs to the camshaft. Yes, I would be interested in trading. I've been wanting to get a set of 1.92 Odessa heads, so that would work for me, as long as your heads aren't rusty and they are flat. Just had mine milled.

Would you be interested in trading camshafts as well? Your motor has quite a bit of low end torque, doesn't it?

 

Heads were brand new from oddessa feb 2013 and habe less than 2k on them and are still basically brand new. There is a bit of surface rust on the outer casting, but its nothing a wire wheel cant fix. Other than that these heads are mint!

My motor has gobs of low end! But the cam shaft is staying. Its paired well with the hs 1.7s.

Ill gladly pull the trigger on this trade, just gotta talk to a few gear heads about clearance so I can make sure the 2.02 valves will still clear the piston...

Pm me so we can work out the details!

 

Redneck,
Did you find out anything about your valve clearance?

 

I still have these heads, they need a good home! Buy them today!

Got a Camshaft I'm selling too! It was only run for 150 miles, then the engine was torn down because the timing chain wasn't set correctly. This camshaft is in great shape, needs a new home too. The springs on the cylinder heads match this camshaft. This camshaft is the Hughes HER0814AL Camshaft, it's a regrind. PM me if you're interested.

[IMG][/IMG]



The lobes are in excellent shape!