Im looking for a 2004 dodge ram 1500 black steering wheel with the cruise and radio controls.
My steering wheel had dry cracks on the top at 12 oclock from sitting in the sun too much.
When driving feels like sandpaper. It works but thought someone here might have a good Black steering wheel.

Would anyone know what years will fit a 2004 slt QC for the steering wheel
thanks

 

I have one off of a '12. Not sure if it it is the same or not.

 

Thanks I wish it did fit. I think from 2003-2005 will fit.

thanks anyways

 

I have one other question so I will get the correct wheel.
What might be the chrysler OEM part # for the 2004-2008 steering wheel BLACK in color?

thanks again

 

Update on steering wheel.

My wheel is leather not the rubber one but I'm sure this will work on that also.

I went out to truck last night and sanded the rough area with 320 wet sandpaper doing it dry. About 10 inch are in size is where the rough area is 12:00 o'clock. It sanded pretty smooth like it was never there. I wiped it down clean and then with a brush painted the area with clear coat that's used for body work. The reason for painting it on was to fill the cracks paint it into the cracks. I did this 2 times sanded the first coat then painted the 2nd coat then sand.
I then sanded the 2nd coat nice and smooth. Then I masked off the area so I would not get over spray and then sprayed the last coat on the wheel a few times to get a good smooth coat.

Have to say it came out great can't even feel the area any more no sand paper feeling.

If anyone has this problem just try this method after fixing you will be surprised and happy as I am. Now I am not going to spend $100 or more for a new or used wheel.
I did read that a lot of people have this problem and most sold on ebay state of the worn rough area at 12:00 o'clock area.

Good luck with the fix if you all try