Has anyone put headers on their trucks? I'm about to order the JBA shorty header for my 2006 Dakota 4X4 V8 Dakota. Does anyone know if it really adds power to the ride? some have told me it doesn't do much but make it louder others have told me that it'll help it alot. so looking for some advice with Dakota owners who have put headers on their trucks and to see what exactly i'm looking at Performance Gain wise! Thanks Guys

__________________
V8's are great until you see the gas gauge screaming **** YOU

well, id say it adds power since ur opening up the exhaust bigger, but hey how much HP could u get out of it 15-20?

__________________
2006 DAKOTA R/T
black halo head lights
upgraded fog lights
tinted all the way around
kn cai
led conversion
DUAL MAGNAFLOW EXHAUST
R/T stage 2 JET CHIP
FASTMAN TB
and a bunch more


-DRiVe It LiKe YoU StOle It-

they wont do much unless you open up the y-pipe. you can cram as much air into the y-pipe as you like, but being it is so restricted you wont gain much. i went the cheaper route and left the factory manifolds and went with a larger y-pipe. much betterer. but if you want to spend 600 plus dollars and hours of install time go ahead. my larger y-pipe and install was 75.00

__________________
thats right i did it ,so what, cry two tears in a bucket, phuck it, lets take it to the stage

13.7 / 101.3 in the 1/4 mile

What did you get for a y-pipe and how much did the pipe itself cost you? Thinking of having mine done when I pull off the tip and paint it.

__________________

CarDomain | MyGig - Cherry Bomb - Debadged - Amsoil - Click for more...

i had the guy at the muffler shop make one from scratch, total bill was 75.00 built and installed.

__________________
thats right i did it ,so what, cry two tears in a bucket, phuck it, lets take it to the stage

13.7 / 101.3 in the 1/4 mile

let me ask you where did they relocate the sensor they wouldnt do the job for me lol-

__________________
2006 DAKOTA R/T
black halo head lights
upgraded fog lights
tinted all the way around
kn cai
led conversion
DUAL MAGNAFLOW EXHAUST
R/T stage 2 JET CHIP
FASTMAN TB
and a bunch more


-DRiVe It LiKe YoU StOle It-

everything is still in the factory spot. i paid in cash, no questions asked and no paper trail

__________________
thats right i did it ,so what, cry two tears in a bucket, phuck it, lets take it to the stage

13.7 / 101.3 in the 1/4 mile

okay when you say make them bigger? like upgrade the size of the piping and leave the stock cats? and how do you get the 02 sensors to fit back up on the pipe? do you just weld it back up?? so your saying i won't see much difference in power if i just put the Headers on? and they havea great deal on them...they are only 350 for a set of JBA Stainless Steel shorty headers.

__________________
V8's are great until you see the gas gauge screaming **** YOU

you are not gonna make the pipes so large that they wont fit, all you need to do is increase the sixe minimal, just enough to let it flow better. right now i think it was about 3/4 of an inch opening. i went 2 inch made one hell of a difference.

__________________
thats right i did it ,so what, cry two tears in a bucket, phuck it, lets take it to the stage

13.7 / 101.3 in the 1/4 mile

so what just after the cat cut the piping off and increase the size of the pipe 2 two inches?

__________________
V8's are great until you see the gas gauge screaming **** YOU