i have a 2000 ram 1500 4x4 and the lines that come off the actuator of the tranfercase area there is 4 outlets on this unit and i dont have a clue where they go because they got ripped off and i cant find a diagram can someone help please!!!!!

__________________
2000 ram 1500 4x4 6 inch bds

Try here: http://www.rm-indy.com/wavefiles/2001ramsrvcmanual.zip

great manual man that has alot of stuff it might take me awhile to find what i need but im sure its in there, by the way do you know if the 4x4 light works off of a vacuume related switch

__________________
2000 ram 1500 4x4 6 inch bds

Yes. It makes contact inside the CAD. If your light is staying on, it's not moving and is stuck in 4. If your light is staying off, it's not moving all the way to make contact and you could be in 2 or not fully engaged in 4.

__________________
95 1500 5.9L, 3" SkyJacker Stage II Sys, 35" Interco Trxus M/T, 16" Steel Streetlock, 4.56, Auburn Posi, Ox, Hella, Remote start, K&N, Dynomax, Custom sway links, 4x4 Posi-Lok, MSD Wires, Custom front n rear bumpers, 9500 winch

light failure can also be a bad switch, dirty connector, torn off wires. check the switch w/ ohm meter. when the cad slides all the way over to engage, it closes the contact switch.

vac diagram (and more)..
http://www.dodgeram.org/tech/repair/..._engagment.htm

__________________
01 1500 Reg Cab 4wd 5.2 auto 3.55 285/75/16 nasta step bar tow hook hypertech 180 3923 trans cooler/filter posi-lok powertrax noslip timbren brite-box pioneer head rockford amp/speaker cobra cb firestick hughes plenum water pump timing chain oil pump rear seal cracked dash