DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   1995-2000 Dodge Avenger (https://dodgeforum.com/forum/1995-2000-dodge-avenger-84/)
-   -   96 Avenger won't start (https://dodgeforum.com/forum/1995-2000-dodge-avenger/223965-96-avenger-wont-start.html)

theonlyfalco Dec 9, 2009 08:38 AM

96 Avenger won't start
 
Hello everyone,
I have a 96 Avenger that cranks but just won't start. It was in the shop where it had a new computer put in it, and the mechanic said the timing was fine. He couldn't fix it either.
We have over the past two weeks, replace the camshaft sensor. The crank sensor has been replaced. Changed all the spark plugs, one was fouled out. It's getting fire and fuel. We thought of changing the relays, but since it's getting fuel and fire I figured that wouldn't be it.
What is the deal with these cars, I have spent a lot of time reading the message boards and it seems everyone has this problem. Any suggestions would be great.

bad venge Dec 9, 2009 08:04 PM

Read the relays post and get the voltmeter out and Check them as well as the CPS testing procedure ,just cause you replaced the part doesn't prove it's good

Dodge*Demon Mar 27, 2010 08:20 PM

Im having the same problem
 
I have a 96 dodge avenger 2.5 v6. We pulled the motor to repair an oil leak in the rear seal. While the motor was out we replaced all seals and gaskets, scoped out everything, cleaned it up and even repainted it. Motor is good. When we put it in, we got no spark to the plugs. So we replaced the distributor (which has the cam sensor, coil, and rotor button). Still no spark. So we replaced the crank sensor, fully charged the battery and still no spark. The 3 relays on the firewall all click when we turn the key. the fuel pump is working because we can hear it. Everything works when we turn the key. Dash lights, radio, interior lights, headlights and tail lights. But STILL no spark. We even changed out the big computer which I believe is the PCM (if im wrong please tell me so). And still no spark. Anyone know what I can do to get this car running again? PLEASE Im desperate.

bad venge Mar 27, 2010 08:53 PM

I'd check for voltage feeding the distributor ... no voltage start backwards
voltage , no spark bad distributor

Avenger1996 Apr 6, 2010 01:44 PM

what about crank possition sensor?

bad venge Apr 6, 2010 08:31 PM

You have to check for voltage first , the voltage feeds the sensors and the distributor/fuel pump ect ect ...You can keep installing parts and without the voltage you'll never ever fix it and waste hundreds of dollars

Avenger1996 Apr 6, 2010 09:04 PM

True that my bad


All times are GMT -4. The time now is 11:29 AM.


© 2026 MH Sub I, LLC dba Internet Brands