Tightening the 6x9" mirrors...
 

For anyone whos mirrors are like mine were and fold in on themselves at highway speeds, here is how to tighten them:

1) Remove the interior door panel (2 phillips head screws and a dozen or so clips)
2) Remove the mirror (3 10mm nuts)
3) Unscrew the black plastic trim peice from the mirror with these 3 screws...

Attachment 103433

4) Move the trim piece out of the way and tighten these 2 bolts until they feel good and tight...

Attachment 103434

5) Reassemble.

Cool! I knew there had to be a simple way to do it. Good thing mine are nice and tight! :P

Ill post in FAQ2.

Make sure you don't get them too tight or you'll end up like me using a pipe wrench to adjust them, lol.

Lol, yes, thats a very good tip. I don't need a pipe wrench, but I sure have to put some weight into them to move them now!!

Hi there, Ive a 1992 Dakota Club Cab LE, V6

Mine just got broken, I tried the atach the control for the mirror, and it got broken, it continued trying to fold the mirror and didnt turned off, I just unpluged the battery and Open the panel, unpluged the control, but now I dont have electric mirrors. :(
Im very sad, since I inmeditatly went to Autozone, And those morons dont have the control for my mirror, dont know what to do, or what to change. Ive opened the control, and its very similar to a game pad, I wonder if theres any other kind of control that I can use on it.

Thnx in advance

Your best bet is go to a junkyard and get another. You can also try going to your local dodge dealership and buy one. Or check www.ebay.com or craigslist.org

yes, this is whut I found:

1992 Dodge Dakota Power Mirror Headlight Switch Panel

http://cgi.ebay.com/ebaymotors/1992-...61910007r36697

But here in Mexico, is going to be a pain in the ass to get it. God Damm.

Shipping in mexico and canada is not that bad. Email the seller and ask him how much and all.

I am SOOOO happy that you posted this. I was about to break down and buy new ones for $100+ each. Thanks.

:-P argggggggggg