I was wondering if any 1 in this fourm has or seen a tt v6 dakota because i have started the project on my 3.9 dakota i know alot of u are going to say wit that money u should just get the v8 but every 1 has the v8 and i wanna be differnt from the pack. this is what i know i need. turbos of course injecters im gonna port and polish the heads better fuel pump and some other things so if any has done this before help me out please

 

We have 2 links to Turbo setups. I beleive both a single turbo setups. But check it out. The links are also in the FAQ2 in this section.

http://www.theturboforums.com/smf/in...topic=131965.0
http://www.theturboforums.com/smf/in...?topic=80720.0

 

thanks for the links but those are v8's any v6's links

 

None that I've ever seen.

But just so you know, the 3.9L v6 is a 5.2L v8 without two cylinders. They both use almost all the same internals. Most anything for the v8 applies to the v6.

 

Ok thanks guess im gonna be the first

 

Cool! Be sure to do a good write up for us for the next person that asks!!

 

so if there the same can i buy valve springs and rocker arm for 5.2 and put them on the v6 head

 

Yes, those are interchangeable between the two engines.

 

sweet thank alot