When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The light comes on, just doesn't pulse. I'm in the process of locating a PCM, no junkyard in my county has a Dakota older than '94. And a new one is way out of the budget at the moment. Might try replacing the wire from the PCM to the coil just in case.
I will try that tomorrow. The harness is already open from hunting down potential damaged wires. Wire looks okay on the outside but you never know. I can only hope it's something that simple.
The light comes on, just doesn't pulse. I'm in the process of locating a PCM, no junkyard in my county has a Dakota older than '94. And a new one is way out of the budget at the moment. Might try replacing the wire from the PCM to the coil just in case.
If you're checking the supply voltage to the coil, it shouldn't flash...it's a solid 12V