5-spd whine
#1
5-spd whine
I have an NV3500HD behind my 5.2L. Shifts great, not too clunky. But, it whines under the following conditions:
-At idle, in neutral with the clutch pedal not being stomped on
-In 1st through 3rd gears
I've had the rig for 6K miles and the trans has never given me any mechanical issues, just the noise.
The pitch of the sound gets higher as revs increase, from a lower growl to a high whine.
Could this be a T/O bearing? Input shaft bearing? Any help would be appreciated, thanks all.
-At idle, in neutral with the clutch pedal not being stomped on
-In 1st through 3rd gears
I've had the rig for 6K miles and the trans has never given me any mechanical issues, just the noise.
The pitch of the sound gets higher as revs increase, from a lower growl to a high whine.
Could this be a T/O bearing? Input shaft bearing? Any help would be appreciated, thanks all.
Last edited by KyleYankee; 12-13-2017 at 11:56 AM. Reason: Left out some detail
#2
#3
#4
#5
#6
#7
Trending Topics
#9
#10
Is this a misprint? No filter on a NV3500 I assume it is. Also, what fluid did you use?
It should be something like this. http://www.pennzoil.com/en_us/produc...NhbGU9ZW5fdXM=
If you have the correct fluid and its full, its more then likely the front input bearing.