1st Gen Durango 1998 - 2003 Durango's

b-kenny1

Thread Tools
 
Search this Thread
 
  #1  
Old 11-27-2008, 11:29 AM
b-kenny1's Avatar
b-kenny1
b-kenny1 is offline
Registered User
Thread Starter
Join Date: Sep 2008
Location: Redford, Mich
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default b-kenny1

I've got a problem with the air distribution on the front HVAC control, it wont
switch to the floor ducts when switched to heater, and in other modes it always blows out of the dash vents. Do I need a DRB-III to check this out?
This is a 2001 Durango. I also can't get any heat from the rear heater. Thanks for any help.
 
  #2  
Old 11-29-2008, 09:10 AM
Mean Green's Avatar
Mean Green
Mean Green is offline
Champion
Join Date: Jun 2006
Location: Reno, NV
Posts: 4,186
Likes: 0
Received 2 Likes on 2 Posts
Default

Check your vacuum line going to the HVAC box to make sure it has broken. As far as the rear heat try flushing the core it sounds like it's plugged.
 
  #3  
Old 12-05-2008, 10:04 AM
b-kenny1's Avatar
b-kenny1
b-kenny1 is offline
Registered User
Thread Starter
Join Date: Sep 2008
Location: Redford, Mich
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

The problem is fixed, at least for now, I located the MODE DOOR ACTUATOR, which rotates a wheel to which linkages from the VENT DOOR, HEATER and the DEFROST doors
are attached to. I removed the actuator and the wheel and found that the vent door was sticking. I moved it through it's range of travel several times until it freed up, reassembled everything, and it's been fine for a week now. Thanks for the responses.
 




All times are GMT -4. The time now is 10:32 AM.