DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   1st Gen Durango (https://dodgeforum.com/forum/1st-gen-durango-69/)
-   -   couldnt get KM2's... so i got these (https://dodgeforum.com/forum/1st-gen-durango/189037-couldnt-get-km2s-so-i-got-these.html)

SchoolBus Feb 8, 2009 03:13 PM

couldnt get KM2's... so i got these
 
5 Attachment(s)
Turned out pretty good, the KM2's were $800 installed..but on national backorder.. these were $600 shipped/installed.

Federal Couragia M/T's $123/tire on Onlinetires.com
Also installed the New OEM rotors and Hawk HPS pads
Attachment 111266
Attachment 111267
Attachment 111268
Attachment 111269
Attachment 111270

DRO318 Feb 9, 2009 07:29 AM

yeah man like the tread on em. :cool:

hydrashocker Feb 9, 2009 07:32 PM

Nice!!!!!

shrpshtr325 Feb 9, 2009 11:17 PM

nice looking tires, but man they must sing a nice loud song when your driving down the highway?????

SchoolBus Feb 10, 2009 12:17 AM

Im not gonna lie, they do make some noise, but i've constantly got the stereo up on the highway so i rarely hear them at cruising speed, i will say they scream at 80+ Rooooaaaarrr is the melody i heard.. as long as they dont scream "Ahhh shiittt" then i dont mind:p

they do wonders off the pavement tho. Very happy with them.
i still cant believe i got all 4 for $540 shipped to my door. :eek:

Durango03 Feb 10, 2009 06:22 PM

What size did you go with?

hydrashocker Feb 10, 2009 06:28 PM

^ LOL ^

With tires like that I would guess who cares on the sound!

SchoolBus Feb 11, 2009 03:45 AM

265/75/16
they measure out to about 32.1" and 10.7" wide
Very minor rubbing on front Left Fender liner, if i could get it pushed back 1/2" i wouldnt hear a thing.

But for $50 im just going to do the Shackle/torsion lift.

DRO318 Feb 12, 2009 08:46 PM

Hey man I can say this I had that same problem. I find that a lot of the time an alignment will help, but if that fails this is what I did after I hit a pole and got it fixed. you can take the tire off, then take off the inner Wheel well plastic, then beat the inner wheel well back with a mallet now I have 2 1/4 inches of clearance after I put the plastic back in place just like it was from the factory. :cool:
Also you can just cut a section the plastic away


All times are GMT -4. The time now is 07:33 PM.


© 2026 MH Sub I, LLC dba Internet Brands