p0068 on 02 Durango
had a p0068 on an 02 D
lots of stuff replaced want to try and do some free checks on things now 2 dealerships stumped have a ngc printout for procedure to test want to look into k7 5volt supply need pdf info on: POWERTRAIN VERIFICATION TEST VER - 5 |
You posted in the wrong forum. I will move it to the durango section.
|
oops, thanks... thought i clicked 1st gen durango
im not a newbie i swear...... ;) |
2 Attachment(s)
Here you go... Dealerships are a joke anymore... A freaking dealer not able to fix their products anymore but you bet they charged for labor to tell you "nope could not find it"
Attachment 106361 Attachment 106362 |
P0068 MAP/MAF-Throttle Pos Correlation
What you should have done is clean the TB. Then moved to a TPS then to a MAP the only thing left is the IAC but with no problems indicated and you wanting to jump around hoops in reality I think you are REALLY over shooting this small problem. Did you reset the PCM, did you give it time to re-learn the settings........ To many questions. I should have the pdf. but what are you even working on here.... motor, trans, transfer.........Anything? |
i am looking for the procedure to find the resistance in the k7 5 volt circuit NGC - POWERTRAIN VERIFICATION TEST VER - 5 as referenced in the NGC printout i have to diagnose P0068
hydrashocker has seen the other thread i had, but to summarize, the vehicle stalls out, randomly..... pcm, tps, map, crank position sensor, cam position sensor, have been replaced, each, one at a time, each time. problem came back other codes have come out as well, documented in my other thread that got out of hand this weekend, i plan to tear apart the intake manifold and look for cracks, as well, as run it and spray around the manifold with a fine mist of starting fluid to listen for changes in the idle, and possibly find a leak have gone to 2 dealerships and 1 independent shop, and no one can figure out what is wrong. when i get up to my parent's house, i will scan the work order from the most recent dealership, their technician statesd "At this time I have no recommendations." |
here is the link to the otehr thread that was locked.
https://dodgeforum.com/forum/1st-gen...lling-out.html i would like to admit and apoligize for my part in being a jerk in that thread. i was frustrated and bothered. |
Oh ya...... Lets keep it simple!
Is this what your looking for: http://www.justanswer.com/uploads/vi...2124_p0068.pdf |
hydrashocker, thanks, i have that one already....
maybe i am not making myself clear enough, or just not conveying what i am looking for.... in some of the procedure to check, at the bottom, it has a yes, or no choice... with directions to then proceed i am looking for: No - Repair the excessive resistance in the (K7) 5-volt Supply circuit. Perform POWERTRAIN VERIFICATION TEST VER - 5. how would i go about doing that? |
Stumped!
|
All times are GMT -4. The time now is 06:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands