Which cyl. is #8 on 4.7l??
#1
#4
#5
#6
I replaced the injector tonight and when I drove it around it feels like it is missing..... No check engine light came back on... yet... but now it have that "miss" feeling. Could I have possible cracked one of the vacuum hoses or just a possible connect loosened up? I will check tomorrow when there is light out again.
#7
If it is missing, it is missing and will throw a MIL. If it feels like it is missing, start by going through the motions of checking the vacuum lines and make sure your air filter isn't dirty or clogged. Also, it wouldn't hurt to use some SeaFoam to run through the system to clean out any deposits in the combustion chamber and injectors. Just get a can of SeaFoam from Wal-Mart or AutoZone or somewhere and use 1/3 of the can sucked up through the brake booster vacuum line and dump the rest in the gas tank.
Trending Topics
#8
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes
on
78 Posts
4.7L ENGINE
DESCRIPTION SPECIFICATION
GENERAL SPECIFICATIONS
Engine Type 90° SOHC V-8 16-Valve
Displacement 4.7 Liters / 4701cc
(287 Cubic Inches)
Bore 93.0 mm (3.66 in.)
Stroke 86.5 mm (3.40 in.)
Compression Ratio 9.0:1
Horsepower 235 BHP @ 4800 RPM
Torque 295 LB-FT @ 3200 RPM
Lead Cylinder #1 Left Bank
Firing Order 1-8-4-3-6-5-7-2
Number 1 is the driver side and 2 thru 8 are the passenger side.
DESCRIPTION SPECIFICATION
GENERAL SPECIFICATIONS
Engine Type 90° SOHC V-8 16-Valve
Displacement 4.7 Liters / 4701cc
(287 Cubic Inches)
Bore 93.0 mm (3.66 in.)
Stroke 86.5 mm (3.40 in.)
Compression Ratio 9.0:1
Horsepower 235 BHP @ 4800 RPM
Torque 295 LB-FT @ 3200 RPM
Lead Cylinder #1 Left Bank
Firing Order 1-8-4-3-6-5-7-2
Number 1 is the driver side and 2 thru 8 are the passenger side.
#9
no code is being thrown yet, but I can feel a difference like one of the injectors are not spraying.... (by firewall) I have checked all and the ohm is 12.5-13 on that side. I have also put a bulb on each connector and it is flashing when running. but still no code...
would a code throw if its clogged? The new one I got was a re manufactured injector but measures fine.
would a code throw if its clogged? The new one I got was a re manufactured injector but measures fine.
#10
It will not throw a code simply because it's clogged per say, but will throw a code if it notices a misfire was detected whether it be a constant miss or an intermittent miss.