DIY: Adding a overhead console w/ temperature and compass (Durango Edition)
#62
Post revival....
A question for Old School
Want to make the trip computer addition to my '00 Dakota, but in my area the exact parts are hard to find.
I have however ad '01 Durango that's going to be parted up with this feature. I also have the fsm's for both but the Durango's a bit lack in the schematics for this piece. Can you provide any insight in adopting an '01's on a '00
Thanking you in advance
A question for Old School
Want to make the trip computer addition to my '00 Dakota, but in my area the exact parts are hard to find.
I have however ad '01 Durango that's going to be parted up with this feature. I also have the fsm's for both but the Durango's a bit lack in the schematics for this piece. Can you provide any insight in adopting an '01's on a '00
Thanking you in advance
#63
Post revival....
A question for Old School
Want to make the trip computer addition to my '00 Dakota, but in my area the exact parts are hard to find.
I have however ad '01 Durango that's going to be parted up with this feature. I also have the fsm's for both but the Durango's a bit lack in the schematics for this piece. Can you provide any insight in adopting an '01's on a '00
Thanking you in advance
A question for Old School
Want to make the trip computer addition to my '00 Dakota, but in my area the exact parts are hard to find.
I have however ad '01 Durango that's going to be parted up with this feature. I also have the fsm's for both but the Durango's a bit lack in the schematics for this piece. Can you provide any insight in adopting an '01's on a '00
Thanking you in advance
#64
I was hoping to somehow translate the data signal. But if there is no way I guess I'm going to have expand my search area. Thanks OldSchool, you saved me a lot of time trying to make something work that wasn't going to. Ok I will stick to the non bus parts.
#66
Eastern Ontario. There are '00 Durangos around here mostly on the road ... but all the ones I've encounter in the local pick and pull's are already salvaged.
A local wreaker can order them in, but charges a higher amount if they ordered in.
A local wreaker can order them in, but charges a higher amount if they ordered in.
#67
ah yes, i have heard it can be a little frustrating to find parts in Canada. I imagine that the higher amount they charge is for the shipping. Last time i shipped parts to a guy in Canada it ended up costing a little over $60USD
Last edited by Old_School; 04-21-2014 at 01:44 PM.
#69
that guys a moron and i have advised him of it... It's down to $150 huh? they where charging $250 or around there last year.
I used to sell kits on ebay that included the console, wire harness and a sheet on where to hook up my labeled wires. I listed it for $75 USD and did sell a few. Last fall the wife came down with some medical issues that prevented me the time to deal with making them up so i had to stop for awhile. Now that she is better and i have more time i just never really thought about doing more.