2000 Dodge Durango
#1
2000 Dodge Durango
I have a 2000 dodge durango with a 4.7 V8. I drove it to work the other day and it ran good then when i went out after work it wouldn't start. I had the batt and alt test and they were good. So i replaced the camshaft postion sensor and the crankshaft postion senor and still nothing. Can someone think of any thing else to i should do?
#4
Look under the hood in the PDC and swap the Auto Shut Down relay with a different one of the same number like the horn. Also check all the main fuses in the dash, especially the automatic door lock fuse.
Also you could try to reset the factory alarm.
Also you could try to reset the factory alarm.
Last edited by hydrashocker; 08-06-2011 at 03:29 PM.
#5
#7