DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   1st Gen Durango (https://dodgeforum.com/forum/1st-gen-durango-69/)
-   -   Best Plugs & Wires ?? (https://dodgeforum.com/forum/1st-gen-durango/382982-best-plugs-and-wires.html)

Sandi987 01-07-2015 02:30 PM

Best Plugs & Wires ??
 
I have a 2002 Durango SXT 4.7 engine 2WD - what are the recommended and/or best plugs/wires to use?

jkeaton 01-07-2015 03:18 PM

OEM plugs. Those engines hate anything but copper core. Wires? Something I've found that more expense does not equate to more anything else. I just buy the basic wire sets. Not too cheap, not too expensive.

that_guy 01-07-2015 04:38 PM

Regular copper core plugs work best, and your 4.7 doesn't have plug wires, it's coil on plug.

hydrashocker 01-09-2015 11:17 AM

+1 Go buy a set of cheap Champion Copper OEM plugs, gap at .040 and install. There is no wires on your engine, it has an individual coil over each of the plugs. You need Copper plugs because the head is aluminum and the block is cast.

jkeaton 01-09-2015 11:55 AM

Why cant I ever remember these things dont have wires...lol

Sandi987 01-10-2015 08:13 AM


Originally Posted by hydrashocker (Post 3219153)
+1 Go buy a set of cheap Champion Copper OEM plugs, gap at .040 and install. There is no wires on your engine, it has an individual coil over each of the plugs. You need Copper plugs because the head is aluminum and the block is cast.

Thank you so much! I did a little more research and discovered exactly what you said. I bought those exact plugs last night and tune-up is being done this morning
Thanks again for the info. :-)

hydrashocker 01-13-2015 02:14 PM

Your very welcome.


All times are GMT -4. The time now is 02:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands