DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Dakota Tech (https://dodgeforum.com/forum/2nd-gen-dakota-tech-67/)
-   -   rims for dakota (https://dodgeforum.com/forum/2nd-gen-dakota-tech/144484-rims-for-dakota.html)

noodle8177 01-27-2008 10:44 PM

rims for dakota
 
i am looking for a set of 15 or 16 inch aftermarket rims for my 1999 dakota 6 on 4.5 bolt patternany other vehicle besides dakota have this bolt pattern not much choice out there for dakota wheels thanks for the help

00DakR/T 01-29-2008 03:30 PM

RE: rims for dakota
 
The only rims I have seen are a few older 4x4 wheels from weld. Bogart can make them, fats and skinnies for about $1300. Or of course you can use Viper wheels. They are 6 lug too but they are 18x10 and 19x13

DeadlyDakota 02-01-2008 04:25 PM

RE: rims for dakota
 
I think I have the same bolt pattern on my 04. Had a difficult time finding rims for it however I did find a set from Smerican Racing. They are called HYPE and I upgraded to the 17x9's all the way around. My Dak is a 4x4 for not sure if that will help ya. Here is the link to their website.

http://www.americanracing.com/appguide/index.asp

they have lots to choose from and I have gotten lots of comments on mine. Check out my Dak in the gallery.

Good Luck.

SinCity R/T 02-02-2008 06:01 PM

RE: rims for dakota
 
Overall there is actually a decent selection of wheels, but you have to hunt them down - I can't think of a single shop that carries a lot of options. If you can't find any wheels under the standard 6x4.5 bolt pattern, check the 6x114.3 metric equivalent.

batman13 02-02-2008 06:08 PM

RE: rims for dakota
 
i've also seen tons of places that will custom drill the dak pattern


All times are GMT -4. The time now is 03:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands