Another Transmission Question...
#11
Only $203 from Jegs!
http://www.jegs.com/i/B%26amp%3BM/130/70297/10002/-1
Are you putting it in front of the radiator?
http://www.jegs.com/i/B%26amp%3BM/130/70297/10002/-1
Are you putting it in front of the radiator?
Last edited by rengnath; 01-07-2011 at 03:04 PM.
#12
Rengnath, Good find!!! The location hasn't been decided yet. Where ever there's room really, I'm currently not home atm, im out in a different area doing schooling, upgrading my welding status. Once i get back to my place and put the truck in the garage im going to size it up, along wit the other things i have to do aswell... So far what i have to do when i get home to the dak would be:
1) Swap out U-joints for 30 Spliner RCV Shafts
2) Change out all the seals inside the D44 Thus gotta pull the carrier etc..
3) going to pcik up a nice front steel winch bumper w/10,000lb'er
4) Do the Trans cooler, god knows she' be's gettin hot in there.
5) I think im gonna build rock guards for it/mount the bumper jack
6) make up a spare tire rack for the 37' : )
and thats about it for dodge this summer, by the time i gets home puts the truck in the garage it will be the first week of march So the truck will be ready once again for the summer festivities heheh
1) Swap out U-joints for 30 Spliner RCV Shafts
2) Change out all the seals inside the D44 Thus gotta pull the carrier etc..
3) going to pcik up a nice front steel winch bumper w/10,000lb'er
4) Do the Trans cooler, god knows she' be's gettin hot in there.
5) I think im gonna build rock guards for it/mount the bumper jack
6) make up a spare tire rack for the 37' : )
and thats about it for dodge this summer, by the time i gets home puts the truck in the garage it will be the first week of march So the truck will be ready once again for the summer festivities heheh