DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Dakota Tech (https://dodgeforum.com/forum/2nd-gen-dakota-tech-67/)
-   -   High pitch squeak, need help! (https://dodgeforum.com/forum/2nd-gen-dakota-tech/341147-high-pitch-squeak-need-help.html)

Blacknights 11-06-2012 09:33 PM

High pitch squeak, need help!
 
Okay so I have recently started hearing a squeak. I have generally located it. It happens per rotation of the front right wheel. Aside from a possible new wheel bearing is there anything that yall could advise this could be?

sxrsil3nt 11-06-2012 09:36 PM

Could be the u-joint on your front driveshaft.

Does it get louder as you speed up?

Blacknights 11-06-2012 09:52 PM

Not louder but more frequent, but when I apply the brakes it always stops. I will look at that though, any other suggestions are still greatly appreciated!!

Tom A 11-06-2012 10:11 PM

How are your brake pads?

dodgeramguy85 11-07-2012 12:21 AM

Check to see if the caliper is tight. They are notorious for stripping out. Mine would squeak when I would hit bumps but would stop when the brake was applied and it turns out that my bottom caliper bolt would not tighten. I drilled it out then heli-coiled it and it was fine

Blacknights 11-07-2012 06:38 AM

Okay so yall are generally thinking the same way as I am. I will note I did just install new rotors. So at this point the brakes is something I am going to get and have specfically looked at.


All times are GMT -4. The time now is 06:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands