12 Attachment(s)
We started this project off as servicing the top end; doing the intake manifold upgrades and modifications.. Double roller timing chain/sprocket upgrade; new seals all the way around the engine.. Engine mounts.. Front axle service, vent mod for deep water (prevent water getting in the front diff), bumper cover swapped and mod.. Replaced the front half axel ball joints, alignment, new window seals, new 3rd brake light on its way... upgraded exacust system (Magnapak's for the flowmaster) Pioneer radio upgrade, new headliner (Black but looks like a deep char/black color, complete cleaning inside carpet removed; rust prevention and paint on the floors. new carpet installed panels detail cleaned with new clips. Soft 8 Rims 15x10.5 with BFG Mud terrain 32" tires. Finally a performance tune. Only thing left is the paint job.
Various other tons of stuff done also leading up to this point but for this post the following photos's are included. Before: Attachment 32509 Before/After: Attachment 32510 After: Attachment 32511 Attachment 32512 Inside: Before: Attachment 32513 After: Attachment 32514 Attachment 32515 Attachment 32516 After the lift: Attachment 32517 Attachment 32518 Update: So I swapped out for a new tool box; added step bars very sharp looking... Attachment 32519 Then i swapped out the Ham/CB antanna for a Browning wip on the tool box :) Attachment 32520 I am finally in love with my truck again just need to do some brake work still I have not gotten around to resolving. |
5 Attachment(s)
February of this year:
Attachment 31499 Attachment 31500 This past weekend: Attachment 31501 Attachment 31502 Attachment 31503 -A ton of paint and body work to repair rust. -New OEM style bumper to replace rotted out unit. -New tonneau cover to replace 10 year old ripped unit. -coil over shocks in the back to add 3/4" -torsion crank in the front to add 3/4" -new shocks up front -New 265/75r16 all terrains. -Plasti dipped wheels and grille. Also a new upper ball joint and sway bar bushings that needed replaced. Replaced spare tire winch that had been cut because of rust. So far I'm in it about $1200. |
My before and after of my first attempt with a second gen. Clearly the after was not fun to see.
April 2015 https://cimg3.ibsrv.net/gimg/dodgefo...e54401430d.jpg May 2015 https://cimg7.ibsrv.net/gimg/dodgefo...913305379f.jpg I never even got to license it before it was attacked by a teenager on a cell phone, however I have found another second gen to start over with, wish me luck! |
Originally Posted by dubble0c
(Post 3266440)
My before and after of my first attempt with a second gen. Clearly the after was not fun to see.
! I fixed my ram after insurance totaled it |
https://cimg5.ibsrv.net/gimg/dodgefo...4865ef1af5.jpg
Heres my 2000 dakota that Ive been working on for the last 8 months. 3 inch body lift, 2 inch rear blocks and 2 inch "torsion bar"lift with 33x12.5x15's on the stock rims with 1 and 1/4 inch wheel spacers......which still rub just a bit sometimes. Built a new rear bumper and a back rack.....which now has a 42 inch light bar on top....next is some body work and paint once winter is over. https://cimg6.ibsrv.net/gimg/dodgefo...73206e1c76.jpg https://cimg7.ibsrv.net/gimg/dodgefo...5f8699f531.jpg https://cimg8.ibsrv.net/gimg/dodgefo...908ef2fbd6.jpg https://cimg9.ibsrv.net/gimg/dodgefo...31f9c357e0.jpg |
what can you tell us about those seats? |
Work in progress
So this weekend I painted my truck using raptor liner. It took three long days to strip down, fix rusted panels, prep, spray and rebuild. I've had the truck for about ten months now and I've personally resealed the motor and transmission, tune up and added a k&n filter on the already installed aftermarket intake tube. It also already had headers and exhaust. raised it 2.5" , new tires, front end bushings, ball joints, and shocks. I plan on doing another 2" body lift and putting my 33" on it. I'm in the process of building a 4bt motor for it. So like I said it's a work in progress but it has a great home.
https://cimg3.ibsrv.net/gimg/dodgefo...cbc66468ef.jpg https://cimg6.ibsrv.net/gimg/dodgefo...d0a79b6d74.jpg |
Originally Posted by l-loren4
(Post 3434666)
So this weekend I painted my truck using raptor liner. It took three long days to strip down, fix rusted panels, prep, spray and rebuild. I've had the truck for about ten months now and I've personally resealed the motor and transmission, tune up and added a k&n filter on the already installed aftermarket intake tube. It also already had headers and exhaust. raised it 2.5" , new tires, front end bushings, ball joints, and shocks. I plan on doing another 2" body lift and putting my 33" on it. I'm in the process of building a 4bt motor for it. So like I said it's a work in progress but it has a great home.
https://cimg3.ibsrv.net/gimg/dodgefo...cbc66468ef.jpg https://cimg6.ibsrv.net/gimg/dodgefo...d0a79b6d74.jpg |
|
My 04 SXT
https://cimg4.ibsrv.net/gimg/dodgefo...3182d8dcf2.jpg
https://cimg7.ibsrv.net/gimg/dodgefo...a098478c05.jpg https://cimg0.ibsrv.net/gimg/dodgefo...0724f0c6a1.jpg New LED's for the dying OEM ones. I am trying to find a picture of before, but it was in BAD shape. Rocker panels and wheel wells all rotted out, headliner fall apart, rusty bumpers, leaking windshield gasket, the list goes on and on. Here she is with all rush cut out and new steel. New bumpers, headlights, condenser, etc. To protect it from the Northeast elements I went ahead and Rhino lined the rockers, flares and grill. A few more things to do (replace ball joints and shock) and she be all set. |
All times are GMT -4. The time now is 12:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands