When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This may be an over simplification, but on my '97 I have had problems with some of the relays under the hood just randomly malfunctioning. I this may be due to moisture, but probably worth checking out. Use a known good relay to check out the others. I don't know if your truck has the same relays as mine or not.
What and where is a remote interrupt? Also how hard is to replace the ignition switch? Is it on the column or in the key switch it self? THANKS EVERYONE!!!!
I meant remote start. Racing is on the mind so I said remote interrupt instead of remote start.
I just stopped at the garage and they removed the RSVP and it still won't start. At this point I don't care about the price, I just want my truck back!!! Anymore ideas??????
I just stopped at the garage and they removed the RSVP and it still won't start. At this point I don't care about the price, I just want my truck back!!! Anymore ideas??????
Did they really remove the remote start module and all of its wiring or did they just unplug the module? I am guessing they only unplugged it. You may still have wiring issues at the ignition switch if the shop only unplugged it and did not connect the starter wire back together. That may be why the truck won't start now. Either do it yourself with a volt meter or do like Dan said and get the truck to a Dodge dealer so they can check it out with the DRB. One way or another you need to find out whether you have a bad ignition switch. I am still betting either the ignition switch harness or the switch is/are bad.
The garage called and said that while this time of not starting they tested the ignition switch and it rang out fine. They did fix the fact of it not turning over. Now it doesn't fire or should I say start. They are leaning to crank sensor or three other sensors. They were closing in when started. They will wait til tomorrow and or Monday to continue. They had a term for the sensors as a group but I forgot.