DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Dakota Tech (https://dodgeforum.com/forum/2nd-gen-dakota-tech-67/)
-   -   No crank No Start (https://dodgeforum.com/forum/2nd-gen-dakota-tech/417753-no-crank-no-start.html)

Jtwes 09-06-2018 09:40 PM

No crank No Start
 
A freind gave me a 2004 Dakota Crew Cab 4x2 4.7 v8 . It will not start . When you turn the ignition on to try to start all you get is a buzzing noise coming from the fuel pump relay and the starter relay. It’s worth noting with the switch in the run position the Square around the PRND keeps going back and forth threw the letters. The odometer reads no bus. Any ideals or pointers would be greatly appreciate. I did unplug all the Crank sensor cam and throttle ps and map sensor one at a time . Tried to start but same thing.

magnethead 09-06-2018 11:04 PM

The dancing square means there is no signal from the neutral safety switch. Likely same reason it won't start - no neutral safety signal.

NoBus is a communications error to the PCM.

Do you get 5 volts to the sensor wires?

Jtwes 09-07-2018 06:37 AM

I didn’t check the voltage at the sensors. I was just doing a quick check to see if there were a short. Is there a simple way to check the park/neutral switch. Also would a bad park/neutral switch make the pcm read no bus. Thank you for trying to help me.


All times are GMT -4. The time now is 10:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands