4.7l troubles! help!
05-14-2013, 07:19 PM
Join Date: Jul 2005
Location: Lincoln, NE
Posts: 163
yep was the sensors on mine that went bad I only buy sensors at Napa good quality sensors.
05-14-2013, 07:22 PM
Join Date: Jul 2005
Location: Lincoln, NE
Posts: 163
Stop buying cheap sensors man the only ones that ever worked for me was the ones at Napa. My brother had a 98 Dodge dakota and his pcm went out and when it did he was like 3,000 miles from home and the truck did not even start.
05-15-2013, 01:34 AM
Registered User
Thread Starter
Join Date: Sep 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
So I just went out and bought the mopar cam sensor because it was closer than a napa store. It runs good so far, but we will see as time goes on.
05-16-2013, 10:49 AM
Registered User
Thread Starter
Join Date: Sep 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
05-28-2013, 03:29 PM
Registered User
Thread Starter
Join Date: Sep 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Just another update. The Cam sensor has been fine so far. I had P 0207 and 0208 come up friday evening. Issue? what to do?
05-28-2013, 04:10 PM
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Do you have an ohmmeter?
Pull the connectors on #7 and #8 fuel injectors, check the resistance. It should be at about 12 ohms, give or take 1.2 ohms at 68 degrees.
Check another for kicks.
06-20-2013, 05:02 PM
Registered User
Thread Starter
Join Date: Sep 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
after the PCM got reset it went away and still has not returned thus far. P0420 popped up today. again. What are some Low Cost ways to try and fix it?
06-20-2013, 07:23 PM
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
P0420 1/1 Catalytic converter efficiency.
About your only hope is to take the truck out for a fast and long ride. You've got to get the catalyst HOT! It may help clean it out. Otherwise, replace.