When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I wanna see how much truck is running with the 1.7 hs . I think my ticking may be from one of them I saw this video and was wondering they been in for about 20k miles
If you have an old pair of valve covers, cut the tops out... bolt them on in place of what's on there now.
This is a very clever idea. If you dont have any spares then just use a bunch of rags and please wear safety glasses. I got some hot oil in my eye when i did it and it burned like hell.
I just wanna see if my rocker arm is lose and inspect the springs . It may e time to just do new heads with spring and pushrods . The rocker arms should still be fine
The oil holes are right above the pushrods, and there is a little "lip" over top of the hole... keeps oil from spraying straight up, and in the rocker where it can do some good.
While there is some oil flow in the vid, sure doesn't seem like much........ not what I am used to seeing in any event.....
My 68 Stang has solid lifters , I need to adjust them all the time. PITA But some one used to make clips (forget what they are called) to put on the rockers so the oil doesn't go everywhere.