2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

building a most fuel economic ram 1500 5.2L

Thread Tools
 
Search this Thread
 
  #31  
Old 12-07-2012, 11:53 AM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

205 is not too bad, with the stock clutch fan it always at 180 in the temp gauge. also on the concern of transmission , my truck has stock outside transmmision cooler too, so it may not raise the tranny temp. i will put lucas trany fluid to help for increase temp , should solve the problem.
 
  #32  
Old 12-07-2012, 12:06 PM
UnregisteredUser's Avatar
UnregisteredUser
UnregisteredUser is offline
Grand Champion
Join Date: Apr 2010
Location: Meeker, CO
Posts: 5,011
Likes: 0
Received 6 Likes on 6 Posts
Default

Originally Posted by SilverSS
A lot of newer cars run 220*-230*.
A lot of newer cars aren't running small block Magnums. They're already pushing it to run the Magnums at 195, which is the why behind the death flash. (Okay, I'm a heretic. Nothing new here.)

Originally Posted by SilverSS
I discussed this with a friend of mine who argued that a name brand gas station is only required to purchase a certain percentage of fuel from the brand they advertised- the rest of it comes from wherever. Any thoughts on that?
Nothing that can be taken to the bank because my experience is from the last century... But once upon a time when I was a field engineer, I used to find myself entirely too often for my liking suited up in Nomex and on one of the many refineries that are/were in California. I serviced equipment at Arco Carson, Mobil Torrance, Chevron El Segundo, Exxon Benicia, and Shell Martinez regularly, and some others sporadically. At those terminals where they had gasoline racks I never saw a company truck at any except the company's lines. There are usually several lines at the racks, with some being company branded and some not, and at some refineries you might see, say, Chevron lines, Texaco lines, and unbranded lines. I never saw independents at the branded lines or branded trucks at the unbranded lines. Doesn't mean it didn't happen -- I never had any business at the racks and only saw them when I would break the rules and go touring around, which is really, really frowned upon. When I got hassled I just pretended to be lost and asked for directions. Some of those security piggers were humorless dudes.

All of this is old information. I'm getting old fast... I haven't set foot on a refinery in a few months over 20 years now. And don't want to, either. Those places are dangerous. Especially when the company wants to shut them down to manipulate prices.
 
  #33  
Old 12-07-2012, 12:08 PM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

there are couple reason i don't like the stock cluch fan, noise, drag down horse power, engine always run at thermostat temp., also will give water pump premature failure.
 
  #34  
Old 12-07-2012, 12:19 PM
Gary-L's Avatar
Gary-L
Gary-L is offline
Legend
Join Date: May 2005
Posts: 8,648
Likes: 0
Received 6 Likes on 6 Posts
Default

This image properly describes this thread and the logic of the OP.

 
  #35  
Old 12-07-2012, 12:42 PM
SilverSS's Avatar
SilverSS
SilverSS is offline
Captain
Join Date: May 2011
Location: Central Florida
Posts: 652
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dodge dude94
And in a truck whose engine and transmission are designed to run at 180-195, 205 is kinda warm. Especially for the transmission.
It's always a good idea to run an external cooler on an auto trans. I've never had an auto without one .
 
  #36  
Old 12-07-2012, 12:47 PM
Wombat Ranger's Avatar
Wombat Ranger
Wombat Ranger is offline
Grand Champion
Join Date: Sep 2011
Location: Wild West
Posts: 5,672
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by stocking2
there are couple reason i don't like the stock cluch fan, noise, drag down horse power, engine always run at thermostat temp., also will give water pump premature failure.
Nobody ever challenged you on the idea that using an electric fan will help your fuel economy.
 
  #37  
Old 12-07-2012, 01:05 PM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

pictures of works
 
Attached Thumbnails building a most fuel economic ram 1500 5.2L-qq20121206152637.jpg   building a most fuel economic ram 1500 5.2L-qq20121206152553.jpg   building a most fuel economic ram 1500 5.2L-img1959ap.jpg  
  #38  
Old 12-07-2012, 01:28 PM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
  #39  
Old 12-07-2012, 01:31 PM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

leak check found is problem with valve
 
  #40  
Old 12-07-2012, 01:33 PM
stocking2's Avatar
stocking2
stocking2 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Location: las vegas
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default


i change the rings too
 


Quick Reply: building a most fuel economic ram 1500 5.2L



All times are GMT -4. The time now is 12:17 PM.