3" body lift is on.
 

after some fighting with it its on... had to cut the 4x4 lever to make it extend cut add 2" from another lever looks stock... 3 days to get it on (had other things to do) all in the instructions are good have to get a rear bracket to lift the rear bumper and im gonna drop the hitch i dont tow any more , here are some pics (5" skyjacker this spring) tires very soon (34")

[IMG]local://upfiles/40785/9B55AAA93440401CAF819CE302B635EE.jpg[/IMG]

[IMG]local://upfiles/40785/4EC2DE81CD324E2EB61FC599FDF82D3E.jpg[/IMG]

[IMG]local://upfiles/40785/C65B1A4C9EC8485199D8CD52ECE416B9.jpg[/IMG]

RE: 3" body lift is on.
 

Very nice! Good job! Now get some tires on there that are proportional.

How hard was the steering extension, and did you weld it?
I'll probably have some other questions for you about this as I get closer to doing mine.

RE: 3" body lift is on.
 

that was easy, just slide an extension on it bolt down that you did not have to weld ill take pic under the hood tomorrow still gotta do the rear bumper raise it 2 inches .gotta order the part..

RE: 3" body lift is on.
 

The PA kit shows you how to raise the rear bumper without having to buy the rear brackets. Do you have a PA body lft?


Silver,
your truck is new enough to where you will not have to extend your t-case shifter. Your t-case shifter assembly is bolted to the body and comes up with the body. You just have to adjust your linkage. The older trucks have a different set up for a t-case shifter.

The steering extension is very easy to put on. You just unbolt your steering shaft from your steerring gear and then slip the extension in and rebolt everything.

RE: 3" body lift is on.
 

lookin good man.. if i were you i wouldnt bother raising the bumper.. put some diamond plate in there to cover up the gap.. it will look good that way

RE: 3" body lift is on.
 

performance accessories installation instructions kit #663
rear bumper bracket kit# 60023
and here i am looking at the instructions right now
# 24 94-97 lengthen the 4x4 shift lever <--welding
unless the box is lying and the book is lying i got a PA kit.. sorry had to order the front bracket for the bumper didnt feel like whats the word ? jerry rig it ? (put it nicely) look at the instruction book # 27 gives a part # for the rear bracket for the rear bumper....are you sure you got the PA kit ?

RE: 3" body lift is on.
 

little tires look funny. Otherwise looks good man. With all the lifting are you gonna pass inspection?




hit me up got a question for ya

RE: 3" body lift is on.
 

the pa kit tells you you can redill holes into the frame to raise the bumper instead of buying the raise brackets. silver isn't going to need to weld his t case lever becuase his is a 99. The only welding i needed to do to mine was the shifter linkage.

RE: 3" body lift is on.
 

thats right , like i said 94-97 needs the welding.... pa bumper height is 30" and ill be damn close.. silver is in the clear for the welding..

RE: 3" body lift is on.
 

I can't beleive it took you 3 days though. Everyone says it is usually 8-12 hours. I know i'm not going to have 3 days to do mine anytime soon. Maybe 1 full day, and a little the next is all. Now you got me worried.