When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hello
All i am new here hope this gets posted in the right place.
I have a 1995 ram 1500 it has a 318,I was wanting to know
what can i put the engine and trans in with little to know problem
Car,jeep,truck
so, you want to use the drive train from your dodge in something else? how about a smaller underpowered 4 cyl Dakota. kinda like the v8 s10 swaps, would be fun. probably gets harder from there.
Hello
All i am new here hope this gets posted in the right place.
I have a 1995 ram 1500 it has a 318,I was wanting to know
what can i put the engine and trans in with little to know problem
Car,jeep,truck
Thanks
Unless it originally came with that engine and tranny, you will probably have to:
1. Get a custom cut driveshaft
2. Do crossmember work
3. Do mount work
4. Run your engine with a computer SEPARATE from the original car computer. unless you are swapping into an old car.
If you are swapping the 318 into a chevy that came with a 350...kit yourself on the head. You can build a 10 second SBC for the price it will cost you to get to 13 seconds on a magnum.