DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Ram Tech (https://dodgeforum.com/forum/2nd-gen-ram-tech-64/)
-   -   OBD code P1294 (https://dodgeforum.com/forum/2nd-gen-ram-tech/190545-obd-code-p1294.html)

WILLIAMJODI 02-19-2009 11:26 PM

OBD code P1294
 
Does anyone know what this code means 1997 1500 5.9L thanks in advance:confused:

dodgeman22 02-19-2009 11:49 PM

i believe that means target idle not reached

helms 02-20-2009 12:00 AM

SYMPTOM
P1294-TARGET IDLE NOT REACHED

WHEN MONITORED
With the engine idling and in drive, if automatic. There must not be a MAP sensor trouble code or a throttle position sensor trouble code.

SET CONDITION
Engine idle is not within 200 rpm above or 100 rpm below target idle for 14 seconds . Three separate failures are required to set a bad trip. Two bad trips are required to set the code.

POSSIBLE CAUSES


Intermittent condition
Vacuum leak
Air induction system
Throttle body and throttle linkage
IAC driver circuit open
PCM

helms 02-20-2009 12:04 AM

3 Attachment(s)
Attachment 110678
Attachment 110679
Attachment 110680

WILLIAMJODI 02-20-2009 02:02 AM

Thanks again


All times are GMT -4. The time now is 07:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands