14x3 Air Breather Drop Base Size?
#1
14x3 Air Breather Drop Base Size?
Looking into a 14x3 air breather for my 98 dodge ram. It is not lifted and doesn't have any spacers. I know its limited to basically 14x3 however the problem I'm having is what drop base size I need? I can get standard or a 7/8" drop base, or bigger but then as I understand it I would have to get a spacer.
So what size do I need?
So what size do I need?
#4
#5
Well in my experience when I had the kegger I got a throttle body spacer thinking it would help clear the linkages (waste of 30 bucks)
Ended up using a spacer on top of the throttle body which for me was 1/2 inch plastic spacer then used electrical tape to seal the spacer to the cleaner
I am using the cheapest edlebrock one of course the shiny one lol
I'm not seeing any part numbers on it sorry about that.
Ended up using a spacer on top of the throttle body which for me was 1/2 inch plastic spacer then used electrical tape to seal the spacer to the cleaner
I am using the cheapest edlebrock one of course the shiny one lol
I'm not seeing any part numbers on it sorry about that.
#6
Well in my experience when I had the kegger I got a throttle body spacer thinking it would help clear the linkages (waste of 30 bucks)
Ended up using a spacer on top of the throttle body which for me was 1/2 inch plastic spacer then used electrical tape to seal the spacer to the cleaner
I am using the cheapest edlebrock one of course the shiny one lol
I'm not seeing any part numbers on it sorry about that.
Ended up using a spacer on top of the throttle body which for me was 1/2 inch plastic spacer then used electrical tape to seal the spacer to the cleaner
I am using the cheapest edlebrock one of course the shiny one lol
I'm not seeing any part numbers on it sorry about that.
#7
Hey, do you guys know the ID of the crankcase vent grommet? I know you can run a tube to the bottom of the breather but the hose is so ugly. I would like to get rid of it. Please tell me its 1", if its not is there a way I can get a 1" grommet from another vehicle to fit?
Trending Topics
#8
Thanks, I would do it myself but my grommet is old and the 90° fitting won't come out. I ordered I new one so I could cut the old one up but it hasn't got here yet and I need to order my breather before my 14x3 gets here.
#9
#10
K, ill order a 1" if it doesn't fit well enough I'll go to O'Reillys and see what they can get me.