When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
HEY GUYS I JUST GOT DONE PULLIN THE MOTOR, TRANSMISSION AND TRANSFERCASE OUT OF MY 01 V10! IT TOOK ME TWO DAYS BUT I GOT IT DONE! NOW TODAY I WAS GOIN TO PUT THE MOTOR ON THE ENGINE STAND I BOLTED IT UP IN THE ONLY WAY POSSIBLY COULD WHICH OF COUSRE WAS THE WRONG WAY! BUT I STILL LOWERED THE ENGINE HOIST TO START PUTTIN WEIGHT ON THE STAND ALL IT DID WAS BEND THE ARMS ON THE STAND AND THE ENGINE ENDED UP WITH THE CRANK PULLEY ABOUT 8 INCHES FROM THE GROUND!! I DONT KNOW WHAT TO DO!!! I NEED SOME HELP IF ANY ONE KNOWS OF A BIGGER STAND THE ONE I GOT IS A 750 LB!! I BOUGHT IT FROM ADVANCE AUTO!! ANYTHING WILL HELP GUYS!!!
sorry ive been a little pissed because of this!! ive been workin on pullin the motor and trans for the past week if not more so im a little irritable!!