2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

$650 ram 1500 should i buy?

  #1  
Old 11-18-2009, 06:55 PM
nathangfnd's Avatar
nathangfnd
nathangfnd is offline
Captain
Thread Starter
Join Date: Apr 2008
Location: Grand Forks, ND
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
Default $650 ram 1500 should i buy?

so a guy i work with rolled his dodge last winter. some of the steering and few extras have been sold and now he want to get rid of the whole truck.

Im not 100% sure how bad the body or motor is but he said its stock and all major parts are there. body shouldnt be to bad since it was in deep snow...He wasnt at work today so i didnt get to ask him all the questions

If i was to buy the truck would it be a good idea to rebuild the motor....Its a 360 and id rebuild to a 408 or 426 but would a rolled motor still be good as long as there are no cracks and stuff?

And if the gears were a LSD would it be ok to swap them in mine. i wont do unless LSD or Lockers
 
  #2  
Old 11-18-2009, 06:59 PM
Hammer Down's Avatar
Hammer Down
Hammer Down is offline
Veteran
Join Date: Jun 2009
Posts: 426
Likes: 0
Received 1 Like on 1 Post
Default

If you have the noney and a place to store it, why not? Plenty of spare parts and if the motor and tranny are good, that has to be worth more than $650 right there. Keep the parts you want and sell those you don't. I think it would be a good investment if the truck isn't totally trashed.
 
  #3  
Old 11-18-2009, 07:01 PM
J415's Avatar
J415
J415 is offline
Champion
Join Date: Feb 2009
Location: Bay Area, CA
Posts: 3,416
Likes: 0
Received 3 Likes on 3 Posts
Default

The first thing that popped in my mind when you said it was in deep snow was RUST!!! Look around for rust. Walk around the body with a magnet and attach it at various places of the body. If it sticks, then it's metal. If it doesn't, then there's bondo or filler there.
 
  #4  
Old 11-18-2009, 07:03 PM
crazzywolfie's Avatar
crazzywolfie
crazzywolfie is offline
Legend
Join Date: Jun 2009
Location: orangeville ontario
Posts: 8,023
Received 71 Likes on 67 Posts
Default

usually the rolling a truck does not hurt the engine and tranny unless he his something first. you would be getting more than $650 dollars in parts.
 
  #5  
Old 11-18-2009, 07:04 PM
big.red.ram's Avatar
big.red.ram
big.red.ram is offline
Captain
Join Date: Sep 2009
Location: Farmland, IN
Posts: 504
Likes: 0
Received 2 Likes on 2 Posts
Default

i dont think he is too worried about the body. it just sounds like he wants the truck as a donor truck for parts and the motor for a rebuild
 
  #6  
Old 11-18-2009, 07:14 PM
nathangfnd's Avatar
nathangfnd
nathangfnd is offline
Captain
Thread Starter
Join Date: Apr 2008
Location: Grand Forks, ND
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah. mostly parts and possibly a driver door. mine is full rusted on the bottom.
 
  #7  
Old 11-18-2009, 07:17 PM
PurplDodge's Avatar
PurplDodge
PurplDodge is offline
Legend
Join Date: Jan 2008
Location: Indiana
Posts: 8,321
Likes: 0
Received 11 Likes on 9 Posts
Default

Originally Posted by J415
The first thing that popped in my mind when you said it was in deep snow was RUST!!! Look around for rust. Walk around the body with a magnet and attach it at various places of the body. If it sticks, then it's metal. If it doesn't, then there's bondo or filler there.
The last thing I would worry about with a rolled truck is rust.

I'd say buy it if you have room to store it.
 
  #8  
Old 11-18-2009, 07:25 PM
dhvaughan's Avatar
dhvaughan
dhvaughan is offline
Hall Of Fame
Join Date: Jul 2006
Location: Gainesville, Ga.
Posts: 12,204
Likes: 0
Received 8 Likes on 8 Posts
Default

nothing at all wrong with a rolled engine as long as it didn't hit anything or get bashed up.

if the rolled truck is the same year range as yours (00-01, or 97-99) then you can use a lot of the parts. if its not in the same range, then be aware that some of the parts may not be interchangeable.

offer him $500.
 
  #9  
Old 11-18-2009, 07:50 PM
Augiedoggy's Avatar
Augiedoggy
Augiedoggy is offline
Champion
Join Date: Aug 2009
Location: Western NY,
Posts: 3,014
Received 8 Likes on 7 Posts
Default

Originally Posted by J415
The first thing that popped in my mind when you said it was in deep snow was RUST!!! Look around for rust. Walk around the body with a magnet and attach it at various places of the body. If it sticks, then it's metal. If it doesn't, then there's bondo or filler there.
lol bondo would be my last concern on a rolled $650 truck!

EDIT damn purpl beat me to it!....I gotta remember to always read the whole thread before adding my two cents!
 
  #10  
Old 11-18-2009, 08:07 PM
J415's Avatar
J415
J415 is offline
Champion
Join Date: Feb 2009
Location: Bay Area, CA
Posts: 3,416
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Augiedoggy
lol bondo would be my last concern on a rolled $650 truck!

EDIT damn purpl beat me to it!....I gotta remember to always read the whole thread before adding my two cents!
Damn chief! Not only did he beat you to it, but he posted it over 30 minutes before you did. Pay attention to detail.
 

Thread Tools
Search this Thread
Quick Reply: $650 ram 1500 should i buy?



All times are GMT -4. The time now is 04:03 AM.