PurplDodge's Spring Project
#1
PurplDodge's Spring Project
This is something I've really needed to do for a LONG time! Plenum gasket, timing chain, and everything that comes along with it.
I got a package in the mail today that I really liked (And amazingly, it wasnt ****!). RockAuto.com is the best!!!
In it was:
12 NGK spark plugs (4 were for the mowers)
Cloyes timing set
Denso Oxygen sensor
FEL-Pro thermostat, throttle body, air cleaner, timing cover set, and Fuel injector O-ring gaskets
Gates upper, lower, and bypass hoses
Goodyear Gatorback serpintine belt
Standard Motor Products coolant temperature sensor
Stant 195 thermostat and radiator cap
Hopefully my Harland Sharp 1.7 roller rockers will arrive by this weekend.
I have all this weekend and next week (Off school for spring break). I still need to get a new (not reman) water pump, oil filter, oil, plenty of Seafoam, some Locktite, and paint.
Oh yeah, I'll also have a sweet DIY for the plenum gasket.
I got a package in the mail today that I really liked (And amazingly, it wasnt ****!). RockAuto.com is the best!!!
In it was:
12 NGK spark plugs (4 were for the mowers)
Cloyes timing set
Denso Oxygen sensor
FEL-Pro thermostat, throttle body, air cleaner, timing cover set, and Fuel injector O-ring gaskets
Gates upper, lower, and bypass hoses
Goodyear Gatorback serpintine belt
Standard Motor Products coolant temperature sensor
Stant 195 thermostat and radiator cap
Hopefully my Harland Sharp 1.7 roller rockers will arrive by this weekend.
I have all this weekend and next week (Off school for spring break). I still need to get a new (not reman) water pump, oil filter, oil, plenty of Seafoam, some Locktite, and paint.
Oh yeah, I'll also have a sweet DIY for the plenum gasket.
Last edited by PurplDodge; 03-17-2010 at 09:06 PM.
#3
as soon as you get the fan and shroud off, pull a table up to the front of the truck for all your tools and parts, and climb over in the engine bay and stand at the front of the motor. it makes it a lot easier.
take your time and double check everything. label every wire and every hose. painters tape is cheap. i put all my bolts in little zip lock bags with labels to avoid the big bucket of bolts that all look alike.
take your time and double check everything. label every wire and every hose. painters tape is cheap. i put all my bolts in little zip lock bags with labels to avoid the big bucket of bolts that all look alike.
#4
Originally Posted by lastrights
sweet man!! those rockers will be fun
as soon as you get the fan and shroud off, pull a table up to the front of the truck for all your tools and parts, and climb over in the engine bay and stand at the front of the motor. it makes it a lot easier.
take your time and double check everything. label every wire and every hose. painters tape is cheap. i put all my bolts in little zip lock bags with labels to avoid the big bucket of bolts that all look alike.
take your time and double check everything. label every wire and every hose. painters tape is cheap. i put all my bolts in little zip lock bags with labels to avoid the big bucket of bolts that all look alike.
Last edited by PurplDodge; 03-17-2010 at 09:16 PM.
#6
#7
Trending Topics
#8