Started my new bumper
#21
got the bumper pretty much done. I think i am gonna cut about three to four inches off of the mounting bracket to move it in close to the body but i have to wait for my winch to get here before i do that to make sure i will have enough room.
I ended up not using the stock brackets and ended up just make new ones ot of 3/8ths steel.
heres a few pics
I also test fitted my new wheels. they are 15x8 crager soft 8's. Tires should be here next week.
I ended up not using the stock brackets and ended up just make new ones ot of 3/8ths steel.
heres a few pics
I also test fitted my new wheels. they are 15x8 crager soft 8's. Tires should be here next week.
#23
#24
That bumper does not flow at all with the body of that truck. It looks like a haphazard contraption that was slapped on with no thought. That thing sits so far off the frame that it looks like some sort of diving board. It has no triangles also, so in a collision, its gonna twist either to the left or the right, and will take your frame rails with it.
Just my opinion, but that bumper is bad news.
Just my opinion, but that bumper is bad news.
#27
I do apprciate constructive ideas, but people getting on and just being plain rude is disrespectful. This is why i think many people do not post what they do to their truck.
bottom line is its my trck. i think it matches the body lines pretty damn well. i did not angle it back to match exactly becase then i wold run into clearence issues with the tires that are going on it.
Trust me the guy who helped me build it has built alot of off road bumpers and smacked into many large things and they did not budge. That is were the factory mounts there bumpers so i think it is fine.
If you would have read the full post you would have read that it is going to be moved in as soon as i get my winch to make sure there is room. You would of also read that it is NOT finished and is NOT being driving on the road or anywhere as of now, Last night we welded in gussets from the tubes to the 3/8 mounting brackets.
SOME people ****ing amaze me. this is not out to all you who have complimented me or who gave me constructive comments such as dodge15004x45.9 and bluebeast2. its to you a-holes who never post anythign helpful to anyone but just browse arond looking for something to nit-pick apart like thebigredone.
Ill prolly just stop posting any thing.
bottom line is its my trck. i think it matches the body lines pretty damn well. i did not angle it back to match exactly becase then i wold run into clearence issues with the tires that are going on it.
Trust me the guy who helped me build it has built alot of off road bumpers and smacked into many large things and they did not budge. That is were the factory mounts there bumpers so i think it is fine.
If you would have read the full post you would have read that it is going to be moved in as soon as i get my winch to make sure there is room. You would of also read that it is NOT finished and is NOT being driving on the road or anywhere as of now, Last night we welded in gussets from the tubes to the 3/8 mounting brackets.
SOME people ****ing amaze me. this is not out to all you who have complimented me or who gave me constructive comments such as dodge15004x45.9 and bluebeast2. its to you a-holes who never post anythign helpful to anyone but just browse arond looking for something to nit-pick apart like thebigredone.
Ill prolly just stop posting any thing.
#30
screw the negative aholes
hey man i like it im in the midst of buiding ine for my dak and when people start picking at it i just tell them if they wanna build one that THEY think is better they can go right ahead. besides most people who do serious wheeling know that its always function over fasion..
the 3/8" steel should be thick enough its what i built my brackets with just used angle.. now im just wondering if i left room for a winch lol.. ill be buying one in the fall i think keep us posted dude and **** every one else
ps i havent posted pics yet of mine waiting to finish it but pm me if you wanna see or get some ideas
the 3/8" steel should be thick enough its what i built my brackets with just used angle.. now im just wondering if i left room for a winch lol.. ill be buying one in the fall i think keep us posted dude and **** every one else
ps i havent posted pics yet of mine waiting to finish it but pm me if you wanna see or get some ideas