When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
has anybody had poblems with the BW parts company i am starting to wonder if i have already replaced the broken part but got a bad new part in the process
yes the fuel pump does come on when i am cranking it i am starting to wonder if i have already changed the part but got a bad one because besides the pcm what else can it be i have changed the tps coil cap rotor wires crank and cam sensor am i missing somthing
i have power at all the sensors and coil if i turn the key on i have power then it stops then turn the key off and on again samething thing but no spark i am going to chnage the crank sensor out agin this weekend to see if i got a bad one so we shall see what happens
It is really important to verify 5v on the feed to all the sensors. If there is a sensor shorted, which includes the trans sensors, it will do just that...........nothing...
If the voltage is down,unplug one sensor at a time while metering from one location until the voltage goes back to 5v, and that sensor will be your problem.
alright just got a v meter and am gonna check that stuff so you are saying with the key on unplug a sensor and put the meter on it then onw at a time unplug and plug back in the other sensors until i see the v moved which test on the meter do i turn the **** to and which tab in side the plug do i touch the meter to thanks very much
i just did that test and i have 2v when i check all the sensors from the tps and checkd each sensor plug and have 2v at all ecept for the coil plug i have no v to it any ideas thanks