Daves $8.00 or less Tranny Check ball Delete
#1
Daves $8.00 or less Tranny Check ball Delete
Parts Needed:
1) 3/8" tranny hose, $3.00 a foot I bought 2 ft.
2) 2 hose clamps.
Pull off the line with the check Valve.
Leave the "Flared sections" on both the fitting coming out of the radiator
and the tranny line in place. Dont cut them off.
Next push the nut back as far as possible on the tranny line.
Use tranny fluid to lube the fitting and steel line,
makes it easier to push the hose on .
Cut hose to lenght needed.
Put both clamps on the hose and push the ends of the hose over
the flared section atleast an 1 1/2" and tighten clamps securely.
(Click Photo's for larger image)
Dave
1) 3/8" tranny hose, $3.00 a foot I bought 2 ft.
2) 2 hose clamps.
Pull off the line with the check Valve.
Leave the "Flared sections" on both the fitting coming out of the radiator
and the tranny line in place. Dont cut them off.
Next push the nut back as far as possible on the tranny line.
Use tranny fluid to lube the fitting and steel line,
makes it easier to push the hose on .
Cut hose to lenght needed.
Put both clamps on the hose and push the ends of the hose over
the flared section atleast an 1 1/2" and tighten clamps securely.
(Click Photo's for larger image)
Dave
Last edited by xjarhead69; 01-21-2014 at 11:02 AM.
#2
sweet, thanks for the short version!!!
Although, I am not going to do this until my truck is out of warranty in march 2011. In case my tranny dies.
Yeah some may say i voided it with the mods I have done. But how can they prove that the tranny was cooked by roller rockers when the check ball valve failed.
I might just get a new check valve. Because they work fine as long as the valve works properly.
Although, I am not going to do this until my truck is out of warranty in march 2011. In case my tranny dies.
Yeah some may say i voided it with the mods I have done. But how can they prove that the tranny was cooked by roller rockers when the check ball valve failed.
I might just get a new check valve. Because they work fine as long as the valve works properly.
#7
Trending Topics
#8
#9
#10
I dont know I bought the hose at a local auto parts store its Gates Hose.
Used regular hose clamps.
The hose fits tightly over the flared section off the steel line and the fitting.
No issues with leaks.
Dave