2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

help with brakes?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-29-2010, 04:14 PM
nater426's Avatar
nater426
nater426 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Location: ny
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default help with brakes?

hey all new poster here hope someone can help me out. i have a 99 2500 4x4 5.9 gas . finished puting the front axle back together after hanging seals. took it for a test drive and lost brakesafter about 10mi pedal just went to the floor! cant find any fluid leeks and fluid level looks good. with the truck off i can push the pedal and get brakes (pedal gets hard can here the calipers moving) as soon as i start the truck goes right back to the floor. first thought was the booster or master but wheen i look on the web i see al sorts of pepole having problomes with abs controler and dont have a lot of money right now to throw parts at the probloem. THANKS
 
  #2  
Old 06-29-2010, 04:17 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,749
Likes: 0
Received 3,177 Likes on 2,930 Posts
Default

Any lights in the dash on? Here any odd noises when you step on the brakes? (engine running.) Will the brakes pump up? (pump the pedal several times)

Welcome to DF!
 
  #3  
Old 06-29-2010, 04:20 PM
nater426's Avatar
nater426
nater426 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Location: ny
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

nope when runing cant pump it up truck off yes. the brake light is on but has been on(broken e-brake handle) didnt notice any noises.
 
  #4  
Old 06-29-2010, 04:21 PM
dakota_raven's Avatar
dakota_raven
dakota_raven is offline
Record Breaker
Join Date: Jan 2009
Location: Texas
Posts: 1,627
Likes: 0
Received 0 Likes on 0 Posts
Default

bleed the lines! sounds like an air pocket in the lines....
 
  #5  
Old 06-29-2010, 04:23 PM
nater426's Avatar
nater426
nater426 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Location: ny
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

plan on it just waiteing for my dad to get home so i can get my vacume bleeder out of his shop all i have here is pressure bleeder
 
  #6  
Old 06-29-2010, 09:48 PM
charlie1935's Avatar
charlie1935
charlie1935 is offline
Record Breaker
Join Date: Mar 2004
Location: DuQuoin,IL.
Posts: 1,977
Likes: 0
Received 0 Likes on 0 Posts
Default

Probably the vacuum booster.
 
  #7  
Old 06-29-2010, 10:06 PM
nater426's Avatar
nater426
nater426 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Location: ny
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

tryed bleeding it no change. does anyone know if you should be able to pull a vacume on the boster? tryed with a vacume pump and cant get above 2pds of vacume
 
  #8  
Old 06-30-2010, 12:01 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,749
Likes: 0
Received 3,177 Likes on 2,930 Posts
Default

Do you get 'boost' when you step on the brakes with the engine running? When you shut the engine off, is the pedal immediately hard to push?
 
  #9  
Old 06-30-2010, 01:28 AM
nater426's Avatar
nater426
nater426 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Location: ny
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

not sure what you mean by boost? if i have my foot on the pedal pushing when i start it it setels to the floor. when i shut it back of i pump it once and it gets progresivley harder and cant make it to the floor then hard at the top when you relese the pedal and try to push it back down.
 
  #10  
Old 06-30-2010, 07:24 AM
dhvaughan's Avatar
dhvaughan
dhvaughan is offline
Hall Of Fame
Join Date: Jul 2006
Location: Gainesville, Ga.
Posts: 12,204
Likes: 0
Received 8 Likes on 8 Posts
Default

if you have a firm brake pedal when truck is not running,
and then completely lose the pedal when the truck is cranked, i'd suspect the booster.

this is a question- is there any way to prove it by disconnecting and bypassing the booster vac line ? you'd not have power assist brakes, so be careful.
 


Quick Reply: help with brakes?



All times are GMT -4. The time now is 01:06 AM.