2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Turning trouble

  #1  
Old 01-05-2022, 06:36 PM
jonboi vandamn's Avatar
jonboi vandamn
jonboi vandamn is offline
Registered User
Thread Starter
Join Date: Aug 2021
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default Turning trouble

I have a 99 3500 the power steering is going out but idk if it’s the pump or the booster both the brakes and the steering pump are full but both make a whine wehem you use them so new booster or power pump ?
 
  #2  
Old 01-05-2022, 09:03 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,679
Likes: 0
Received 3,170 Likes on 2,923 Posts
Default

If both steering and hydraboost are acting up, that is more than likely the pump.
 
  #3  
Old 01-06-2022, 09:11 AM
jonboi vandamn's Avatar
jonboi vandamn
jonboi vandamn is offline
Registered User
Thread Starter
Join Date: Aug 2021
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by HeyYou
If both steering and hydraboost are acting up, that is more than likely the pump.
it’s the brakes and the power steering making a noise and it is hard to turn and the brakes wine and the steering pump
 
  #4  
Old 01-06-2022, 10:22 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,679
Likes: 0
Received 3,170 Likes on 2,923 Posts
Default

That's likely the pump.

On mine, (96 gasser) the pump shaft broke...... internal to the pump. The pulley stayed in place, and everything *looked* normal. But, when I pulled the belt, the pulley, and a chunk of the shaft just fell out. Explained a lot. (driving it like that, pulling a 4000 pound chipper, was no fun at all.....) I think yours, the pump is just failing, or, it's low on fluid.
 
  #5  
Old 01-06-2022, 12:09 PM
jonboi vandamn's Avatar
jonboi vandamn
jonboi vandamn is offline
Registered User
Thread Starter
Join Date: Aug 2021
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by HeyYou
That's likely the pump.

On mine, (96 gasser) the pump shaft broke...... internal to the pump. The pulley stayed in place, and everything *looked* normal. But, when I pulled the belt, the pulley, and a chunk of the shaft just fell out. Explained a lot. (driving it like that, pulling a 4000 pound chipper, was no fun at all.....) I think yours, the pump is just failing, or, it's low on fluid.
fluid good when you pop the top it’s bubbly but steering is hit and miss and the brakes act funny and wine
 
  #6  
Old 01-06-2022, 12:26 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,679
Likes: 0
Received 3,170 Likes on 2,923 Posts
Default

Its' sucking air somewhere then. Which will indeed make it whine.
 
  #7  
Old 01-06-2022, 02:27 PM
jonboi vandamn's Avatar
jonboi vandamn
jonboi vandamn is offline
Registered User
Thread Starter
Join Date: Aug 2021
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default

Could that be caused by a bad booster?
 
  #8  
Old 01-06-2022, 02:33 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,679
Likes: 0
Received 3,170 Likes on 2,923 Posts
Default

You have hydraboost on your truck for the brakes? I don't think it would have anything to do with it.... it just gets pressurized fluid from the pump. The pump is the only thing that does the 'sucking', for lack of a better term. The rest of the system is pretty much sealed, or, it should be..... Is it leaking anywhere??
 
  #9  
Old 01-06-2022, 03:11 PM
jonboi vandamn's Avatar
jonboi vandamn
jonboi vandamn is offline
Registered User
Thread Starter
Join Date: Aug 2021
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Default

Not that I can tell I’ve laid under it while someone was trying to turn it an a found no leaks
 
  #10  
Old 01-06-2022, 03:21 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,679
Likes: 0
Received 3,170 Likes on 2,923 Posts
Default

I would suggest changing the pump, however, last time I did a power steering pump on anything, it took four tries to get one that worked at all..... and even that one was noisy. New rack, new lines, new pump, still noisy. The quality of aftermarket parts has gone down significantly of late.
 

Thread Tools
Search this Thread
Quick Reply: Turning trouble



All times are GMT -4. The time now is 07:31 PM.