When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
there is actually a guy on ********* that swapped a 2nd gen v10 into a 2nd gen ram. He has lots of info and personal experience and even has some clips. The truck sounds kind of weird, guess im just use to the v8. But he wanted the same thing as a play/sleeper looking truck. Let me try to find it
I believe the V10 out of the 3/4 and 1 ton truck is very similar to the Viper V10. I believe a lot of the parts from the viper motor will swap over. Just some food for thought.
I believe the V10 out of the 3/4 and 1 ton truck is very similar to the Viper V10. I believe a lot of the parts from the viper motor will swap over. Just some food for thought.
Actually very few to none of the parts interchange between the motors. The cast iron block truck V-10 was based on the aluminum block viper motor but there are major differences.
Actually very few to none of the parts interchange between the motors. The cast iron block truck V-10 was based on the aluminum block viper motor but there are major differences.
Interesting. I could have sworn I heard something or another about the intake manifold swapping over, and a few other things. Maybe I was wrong though.
Either way, a set of Borla headers and a Tuner would really make a v10 fun to drive.
Flexalite efans
MSD coil/dig6 (could go analogue box)
Fastman 52tb (home port would flow less/may restrict hp)
M1/2BBL (kegger will tend to leak w/boost)
Mopar RT+10 cam (should of adv 4*)
Crower 1.7rr
MP lifters & 600 springs, retainers
Eddy TES hdrs, ypipe
Magnaflow 3" cat & 3" muff
Procharger D-1SC w/3.5" pulley (7psi@4900rpm) & 3core
AM boost/vac, fuel pressure, wideband o2/af gauges needed
that is where i am headed, pretty much exactly. except i have hughes intake,sct tuner, and going with the p-1sc supercharger head unit with 10psi. i would love to see 500hp.