2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

will this work?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-09-2011, 10:22 PM
tj941500's Avatar
tj941500
tj941500 is offline
Rookie
Thread Starter
Join Date: Nov 2010
Location: PA
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default will this work?

I'm looking at a 1997 1500 ram to buy ....but it needs an automatic transmission..... I have a 94 1500 ram and a 98 1500 ram.... would either one of the transmissions that I have work in the 97??
 
  #2  
Old 01-09-2011, 10:24 PM
CPTAFW163's Avatar
CPTAFW163
CPTAFW163 is offline
Champion
Join Date: Jun 2004
Location: Ft Campbell, KY/TN
Posts: 2,811
Likes: 0
Received 2 Likes on 2 Posts
Default

Yes, one will work, but i forgot which one. I know that my 1996 has the RE and my 2001 has the RH. But i forgot when the years changed. I believe it was 1998, but wait for someone else to chime in.
 
  #3  
Old 01-09-2011, 10:27 PM
dodgeram07's Avatar
dodgeram07
dodgeram07 is offline
Champion
Join Date: Mar 2008
Location: ohio
Posts: 3,363
Likes: 0
Received 1 Like on 1 Post
Default

94-95 rh...........96 and + are RE

so the 98 may work, but i think wiring harmess change once throw those RE years
 
  #4  
Old 01-09-2011, 10:28 PM
matty675's Avatar
matty675
matty675 is offline
Record Breaker
Join Date: Feb 2010
Location: Chesapeake, VA
Posts: 1,504
Likes: 0
Received 1 Like on 1 Post
Default

94-95 was rh, 96-01 was re, however i beleive only 97-98 were the same exact re
 
  #5  
Old 01-09-2011, 10:51 PM
tj941500's Avatar
tj941500
tj941500 is offline
Rookie
Thread Starter
Join Date: Nov 2010
Location: PA
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default

Good the 98 is the parts truck I have for my 94 project build... the 97 I just found at a local car lot for $450 bucks.... its an extended cab with a really nice body... it needs a wheel bearing, break lines and a transmission.... I figure I can buy for a cheap build and give it to the wife
 



Quick Reply: will this work?



All times are GMT -4. The time now is 02:31 AM.