DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Ram Tech (https://dodgeforum.com/forum/2nd-gen-ram-tech-64/)
-   -   neutral safety switch electrical removal ? (https://dodgeforum.com/forum/2nd-gen-ram-tech/304806-neutral-safety-switch-electrical-removal.html)

cj5orion 09-24-2011 09:38 AM

neutral safety switch electrical removal ?
 
OK...I know theres a tab on this thing,but I cant locate it !
Its hard enough to even reach this switch,its a one handed operation !
But wheres the damn tab,must be on top,cant feel anything ?
is it a push in while pulling or pry up n pull ?
double squeezer on the sides ?

gotta change the switch out cause no bu lites but I cant get the damn elec off !!!! retarded...I know....

somebody "been there" already ????????????

cj5orion 09-26-2011 07:56 PM

bump bumpity bump

c'mon fellas...I know it sounds like a silly Q,but unless I start yanking linkage rods out,I cant get this damn thing off

chadhager03 09-26-2011 08:03 PM

Not sure if this is what you mean but there's a picture of what I think you're talking about in this thread it is a Dakota, and an early one at that but it could be similar
https://dodgeforum.com/forum/1st-gen-dakota-tech/191960-46rh-to-nv3500-swap-5-2l-4x4.html

cj5orion 09-27-2011 08:11 AM

neutral safety switch...OK this is stupid !
 
Cant get the damn electrical plug off the switch to change it out !
Cant find,feel,or see "the lil tab" to pull the plug !
I'm assuming its a "press down" tab as you pull ?
Cause of the linkage's,etc....its a one handed operation,man I cant get it ?

anybody "been there" ? whats the "trick" ?

:icon_nut:

chadhager03 09-27-2011 08:16 AM

Didnt I already answer this?????? Or try

HeyYou 09-27-2011 08:40 AM

Yeah, duplicate thread..... merged with the other one.

chadhager03 09-27-2011 08:55 AM

Oh ok I just got confused, I was looking at the top posts and felt like an a-hole lol

cj5orion 09-27-2011 09:12 AM

yea...dup thread ....maybe ?
but nobody's mentioned how to get the elec plug off the switch !
Theres all kind of stuff about how to jump the pins,how to change the switch,how to this,how to that .......?

I've done a lot of work on this truck and my other vehicles,I've "pulled many a elec plug"....this one.....VERY HARD....to get to...even with one hand !
I know theres a "tab" on it....somewhere ? I cant find it,press it,pry it,see it !

Several mech's "advise" qoute " oh yeah,ya gotta release the tab to pull it" unqoute. GEE THANX BUD ! wheres the tab ? press it or pry it ?

Now I know this is a fairly simple thing,seems like I'm pullin teeth tryin to get an answer about "pulling the plug" though.Even tryed jus prying it off with a flat screwdriver....breakin the tab.....no go

zman17 09-27-2011 09:22 AM

Try using a small mirror to get a better look at the tab.


All times are GMT -4. The time now is 05:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands