5.9 Rebuild on the cheap: Now Just Empty Every Pocket build.
#521
#522
#524
When you figure people are asking $1,000 for a M1, not saying they're getting that much. Plus $4-500 for a throttle body depending on what you buy and the cost of one of these 6 packs isn't quiet so bad. An air gap is $600 so again yes the 6 pack is spendy but I am not going to complain as I didn't pay full price.
I know you've been waiting (not like I'm that important) to see what I had planned. I wish I had the skills to make my own intake.
Last edited by Wildman4x4nut; 09-03-2017 at 04:12 PM.
#526
#528
#529
#530
Okay it's time to bring this thread back to life.
I picked the engine up from the machine shop on Monday. I am glad I had the engine gone through as the cylinders were out of round. It seems that the shop that had built the engine prior to this hadn't used torque plates. The next problem was that the pistons showed sign of being overheated. And then the crank was out of balance also. Here are the sheets from the shop showing the balance on the crank.
I picked the engine up from the machine shop on Monday. I am glad I had the engine gone through as the cylinders were out of round. It seems that the shop that had built the engine prior to this hadn't used torque plates. The next problem was that the pistons showed sign of being overheated. And then the crank was out of balance also. Here are the sheets from the shop showing the balance on the crank.