leveling kit
#12
#16
They made a big difference on my truck. But I will be pulling those out as well as the springs and buying the fabtech 3" kit. I cant stand the ride and steering I get with the spacers. The fabtech kit comes with control arms to correct steering geometry and some new lift coil springs, and its only around $170 on some sites. Like I said before the cup will compress the spring about 10-20% more than at stock height. So you loose alot of the functioning part of the coil that compresses progressively, and you end up feeling like your running over 2x4"s all the time. I put new pro-comp shocks and new ball joints and bushings along with my lift kit and I think it rides worse than on the 12 yr old suspension.
#17
#18
Daystar Spacers Vs. Fabtech Lift
I too had been considering the coil spacers for my truck. I found a kit which includes the coil spacers and front shocks for about $150.00. I had considered going with Fabtech instead, although much more expensive, may be worth it in the long run? The kit I found through the Fabtech site looks ideal but again, a lot of money. Is there a link to the $170.00 kit? I'd be all over that, if not, I may just get the spacer kit or save for the Fabtech kit in the link below?
http://www.fabtechmotorsports.com/pr...&display=DODGE 2WD
By the way, mangoamerican, your truck looks good, that's about how I'd hoped my truck would look w/coil spacers.
http://www.fabtechmotorsports.com/pr...&display=DODGE 2WD
By the way, mangoamerican, your truck looks good, that's about how I'd hoped my truck would look w/coil spacers.
#19