ah hah! i knew somethin was off....so then the lights should be 9007's and some arse put in the wrong housings...let me check out these sport housings and ill post back..
|
Ok so looks like i can get a pair of
Spyder Headlight - Clear Lens, Plastic Lens, Performance - Projector, Dot, SAE Approved, Composite, Direct Fit, With Bulbs 1994-2001 Dodge Ram 1500 SPYDER HALO LED PROJECTOR HEADLIGHTS, CHROME HOUSING, CLEAR PLASTIC LENS, SET OF 2 for $182 you guys like a chrome housing or a black one (im usually a crome guy but the black ones on this truck might look pretty bad a**) |
btw thats cheaper than buying stock housings and then getting the right bulbs ;)
|
How bout looking under the hood and see if you have the empty bulb sockets hanging there. Each side has a 9007 lowbeam and 9004 highbeam. Hopefully the previous owner didn't destroy the factory wiring harness.
|
Black would be my pick for colour, me I would just put the stock Sport housings back in. They work great, one of the best lighting upgrades I have done.
|
Check out AMAutoparts.com for better pricing on stock housings. I got both, with side markers, for under 90 bucks shipped. They even came with bulbs.
|
Originally Posted by merc225hp
(Post 2924414)
Black would be my pick for colour, me I would just put the stock Sport housings back in. They work great, one of the best lighting upgrades I have done.
So +1 to this. |
Originally Posted by HeyYou
(Post 2924542)
Check out AMAutoparts.com for better pricing on stock housings. I got both, with side markers, for under 90 bucks shipped. They even came with bulbs.
|
Originally Posted by beeker
(Post 2924411)
How bout looking under the hood and see if you have the empty bulb sockets hanging there. Each side has a 9007 lowbeam and 9004 highbeam. Hopefully the previous owner didn't destroy the factory wiring harness.
|
Originally Posted by merc225hp
(Post 2924414)
Black would be my pick for colour, me I would just put the stock Sport housings back in. They work great, one of the best lighting upgrades I have done.
...I would like to make the daytime running lights stay on with the highs and lows though...previous owner had them half a$$ wired to the passenger harness and a stock splice in the bumper was bad...i rid myself of the shotty tie in and fixed the splice. I read another thread about jumpering the relay location in PDC but it was said that was just for running them with the highs. |
All times are GMT -4. The time now is 04:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands