When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 95 ram 5.9L. I have a code 32. has anyone with that code experience a problem other than an EGR valve?. the engine runs smooth but the engine light keeps coming on. tks
tks for the reply. I am going to start working on it tomorrow. with the egr behind the intake manifold, it is hard to examine. think I will take off the shroud and fan so I can stand more comfortably.
I verified that the electrical connection was plugged in to the solenoid. I checked the vacuum line connections and discovered that the connections between the solenoid and valve were backward (I compared my connections to the connections on new valve/solenoid found on line). about 800 miles ago I replaced the intake manifold and plenum gaskets and apparently hooked them back up backwards. took it for a short test ride and no "check engine" light. it will take more driving to confirm it is fixed but I am hopefully optimistic.
well, the check engine light came back on. I removed the egr valve, cleaned it and reinstalled it on the engine. light came back on. replaced egr valve with new one today. just returned from a 20 mile trip. no light. hopefully it is fixed, if not, I will post again.