2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

99' Transmission Issue

Thread Tools
 
Search this Thread
 
  #1  
Old 09-15-2013, 01:56 PM
mrneon's Avatar
mrneon
mrneon is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Unhappy 99' Transmission Issue

Dodge Ram 1500 - 5.9L - 2WD - Laramie.

The transmission is not shifting out of first, it will go all the way over to to red and still not shift. Even shifting manually from 1 to 2 makes no different.

I read on another post to unplug the 8-prong connector on the transmission (guess that's what connects the solenoid). My dad and I took it down the road and sure enough, shifting from 1 to 2 did result in a gear change. I read in another forum somewhere that it could be the speed sensor. Is there a test or anything else we need to try to mark out what is causing the problem?
 
  #2  
Old 09-15-2013, 05:30 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,697
Likes: 0
Received 3,171 Likes on 2,924 Posts
Default

You just did the test, and found your problem.

Time to drop the pan, and replace the governor pressure sensor and solenoid. Borg Warner makes a heavy duty replacement, that is a much better design than the stock part. They are available on EBay for about 100 bucks for the set.

Get a filter/gasket kit as well, and at least six quarts of fluid. These are pretty easy to change, just need the pan, and filter out of the way.
 
  #3  
Old 09-22-2013, 08:08 AM
mrneon's Avatar
mrneon
mrneon is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HeyYou
You just did the test, and found your problem.

Time to drop the pan, and replace the governor pressure sensor and solenoid. Borg Warner makes a heavy duty replacement, that is a much better design than the stock part. They are available on EBay for about 100 bucks for the set.

Get a filter/gasket kit as well, and at least six quarts of fluid. These are pretty easy to change, just need the pan, and filter out of the way.

WE are going to buy the parts today. I'll post back if this fixes the issue.
 
  #4  
Old 09-22-2013, 08:46 AM
stewie01's Avatar
stewie01
stewie01 is offline
Legend
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes on 2 Posts
Default

Also wouldn't hurt to check TV Cable adjustment.

http://bionicdodge.com/Download/Dodg...Adjustment.pdf
 
  #5  
Old 10-05-2013, 05:40 PM
mrneon's Avatar
mrneon
mrneon is offline
Registered User
Thread Starter
Join Date: Jul 2010
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

To all who helped, thanks. We replaced both sensors/solenoid and it works like a charm. However, the shifts seem a little late. I am going to look at the guide and adjust the TV cable later.
 



Quick Reply: 99' Transmission Issue



All times are GMT -4. The time now is 02:13 AM.