Level kit
 

Hey guys. I just put a 2 in level kit on my 1999 ram 1500 4x4 to fit 35s. They fit great and look awesome but the rear sits about 3/4 to 1 in lower than the front now. What do u guys think is the best way to raise the rear an inch? It has the factory blocks in the back so i didn't know if i should get bigger blocks or go another route. thanks for any help in advance.

Could either do blocks or add a leaf. Don't stack blocks though if you go that route, its unsafe.

Add a leaf.

Thanks. Didnt plan on stacking but haven't crawled under it yet to see how big factory blocks are so I know what blocks I need and was considering adding a leaf. Didnt know which way would be cheaper.

IIRC the stock blocks are 3".