Troubleshooting fuel pump
so, I found the fuel pump relay (can't believe I missed it the first time and posted)!
in PDC I do have consent power at pin 30 and have no power at pin 85 UNTIL I turn the key on. I do have ground at pin 86. I put a jumper between 12v power and pin 87 and nothing. I do have a fuel rail gauge and I also used a amp meter to test load of fuel pump, nothing. so does this mean the fuel pump is shot? |
If you have good twelve volts at pin 30, and jumping to 87 didn't make the pump run, yep, the pump is shot.
|
new pump, can't wait! it so cold right now in CT.
|
Wait. What? You expect your truck to wait for nice weather to require repairs????? :D You should know by now it seldom works that way. :D
|
Don't forget to only get a Denso or Delphi brand pump.
|
ok I seen a lot of the stuff in the truck is Delphi so I will go with that, from summit.
|
All times are GMT -4. The time now is 12:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands